{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack GARANT Master Steel SlotMachine solid carbide roughing end mill HPC, 5 pieces
Article no.: 2109911
Catalog no.: GG1048
Article code:
Product details
Technical Data
| Kühlschmierstoff | nein | |
| nass min. | geeignet | |
| Serie | Master Steel | |
| nass max. | geeignet | |
| Herstellerbezeichnung | GARANT Master Steel SlotMachine VHM-Schruppfräser HPC | |
| trocken Bearbeitung | bedingt geeignet | |
| Öl | geeignet | |
| Luft | bedingt geeignet | |
| Schneidstoff | VHM | |
| Zerspanungsgruppe | M (nichtrostender Stahl); P (Stahl) | |
| Beschichtung | TiAlN | |
| Schneidendurchmesser Dc | 12 mm | |
| Toleranz Schneidendurchmesser | Toleranzklasse ISO | |
| Toleranzklasse | d11 | |
| Schneidenlänge Lc | 16 mm | |
| ISO-Fräsertyp | Eckfräser | |
| Rückspanwinkel | 42 Grad | |
| Anzahl wirksamer Schneiden (umfangseitig) Z | 5 | |
| Drallrichtung | rechts | |
| Drallwinkel | 42 Grad | |
| Teilung der Schneiden | ungleich | |
| Zustellrichtung | horizontal, schräg und vertikal | |
| Anzahl Spannuten | 5 | |
| Länge gesamt L | 73 mm | |
| Schneidrichtung | rechtsschneidend | |
| Werkzeugausführung | Voll-Hartmetall | |
| Norm | DIN 6527 | |
| Bearbeitungsverfahren | Eckfräsen; Nutenfräsen; Schraubfräsen (Gewindefräsen) | |
| Farbring | grün | |
| Zerspanungsstrategie | HPC | |
| Produktart | Eckfräser | |
| Korrekturfaktor fz | 1.5 | |
| Schnitttiefe min. | 0.05 mm | |
| Schnitttiefe max. L2 | 12 mm; 16 mm |
Identification & Classification
| Article number | 2109911 | |
| Catalog number | GG1048 | |
| EAN / GTIN | 4067263134848 | |
| Manufacturer number | GG1048 12 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
200
P
180
P
160
P
140
P
110
M
50
M
35
K
200
Description
Version:
With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Feed rate per tooth up to 0.1 mm up to a depth of 2×D (in the slot milled from solid).
Same as 205548.
Feed rate per tooth up to 0.1 mm up to a depth of 2×D (in the slot milled from solid).
Same as 205548.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core. Plunge angle of up to 10° possible thanks to generous recess on the front face.
Application:
For roughing machining, particularly suitable for full-slot machining.