{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide hole saw high, ⌀ DC: 22mm
Article no.: 215666
Catalog no.: 118400
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | straight clamping flat | |
| Shank diameter | 6 mm | |
| Shank length | 35 mm | |
| Upper dimension of nominal diameter | 0.1 mm | |
| Lower dimension of nominal diameter | -0.05 mm | |
| Shank type | HB | |
| Cutter diameter, min. | 22 mm | |
| Cutter diameter, max. | 22 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Min. manufacturer tolerance | -0.05 mm | |
| Max. manufacturer tolerance | 0.1 mm | |
| Number of steps | 1 | |
| Body diameter | 22 mm | |
| Flute length | 35 mm | |
| Product designation (type) | N | |
| Tool material | Carbide | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Usable length | 35 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | drilling into solid material | |
| Colour ring | without | |
| Type of product | hole saw | |
| Content | single part |
Identification & Classification
| Article number | 215666 | |
| Catalog number | 118400 | |
| EAN / GTIN | 4045197036766 | |
| Manufacturer number | 118400 22 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: size ≤ 55 = 35 mm / size 60 = 60 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: size ≤ 55 = 35 mm / size 60 = 60 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
For flat material up to 4 mm thickness, and pipes of up to 4 mm wall thickness.
For flat material up to 4 mm thickness, and pipes of up to 4 mm wall thickness.