{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Carbide hole saw high, ⌀ DC: 26mm
Article no.: 215670
Catalog no.: 118400
Article code:
- Tool material: Carbide
- Standard: Manufacturer’s standard
- Shank: Three drive flats shank
- ⌀ tolerance: −0.05 / 0.1
Product details
Technical Data
| Nominal ⌀ DC | 26 mm | |
| Version | high | |
| Tool material | Carbide | |
| Standard | Manufacturer’s standard | |
| Shank | Three drive flats shank | |
| Shank ⌀ | 10 mm | |
| ⌀ tolerance | −0.05 / 0.1 mm | |
| Length L | 35 mm | |
| Colour ring | without | |
| Type of product | Hole saw |
Identification & Classification
| Article number | 215670 | |
| Catalog number | 118400 | |
| EAN / GTIN | 4045197036803 | |
| Manufacturer number | 118400 26 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: size ≤ 55 = 35 mm / size 60 = 60 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: size ≤ 55 = 35 mm / size 60 = 60 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
For flat material up to 4 mm thickness, and pipes of up to 4 mm wall thickness.
For flat material up to 4 mm thickness, and pipes of up to 4 mm wall thickness.