{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide hole saw flat, ⌀ DC: 68mm
Article no.: 215751
Catalog no.: 118500
Article code:
Product details
Technical Data
| Kühlschmierstoff | nein | |
| Schnittstellen Position | maschinenseitig | |
| Aufnahmetyp | Zylinderschaft | |
| Aufnahmeform | gerade Spannfläche | |
| Durchmesser Schaft DS | 13 mm | |
| oberes Abmaß Nenndurchmesser | 0,1 mm | |
| unteres Abmaß Nenndurchmesser | -0,05 mm | |
| Schaftausführung | HB | |
| Schneidendurchmesser, min. Dc min. | 68 mm | |
| Schneidendurchmesser, max. Dc max. | 68 mm | |
| Toleranz Schneidendurchmesser | Herstellertoleranz | |
| Herstellertoleranz min. | -0,05 mm | |
| Herstellertoleranz max. | 0,1 mm | |
| Spannutenlänge Lc | 8 mm | |
| Verwendung bei Bohrungsart | Durchgangsloch | |
| Schneidstoff | HM | |
| Schnittstelle | Trennstelle 1 | |
| Nutzlänge L1 | 8 mm | |
| Schneidrichtung | rechtsschneidend | |
| Werkzeugausführung | Stahl-Träger mit gelöteten Hartstoff-Schneideinsätzen nach DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Norm | Werksnorm | |
| Bearbeitungsverfahren | Bohren ins Volle (BVB) | |
| Farbring | ohne | |
| Produktart | Lochschneider | |
| Inhalt | Einzelteil |
Identification & Classification
| Article number | 215751 | |
| Catalog number | 118500 | |
| EAN / GTIN | 4045197037534 | |
| Manufacturer number | 118500 68 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
Only for flat material up to 4 mm thickness.
Only for flat material up to 4 mm thickness.