{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide hole saw flat, ⌀ DC: 80mm
Article no.: 215754
Catalog no.: 118500
Article code:
Product details
Technical Data
| Lubrorefrigerante | no | |
| Posizione delle interfacce | Lato macchina | |
| Tipo di attacco | Codolo cilindrico | |
| Modulo di attacco | recht spanvlak | |
| Diametro codolo DS | 13 mm | |
| Esecuzione del codolo | HB | |
| Diametro tagliente, min. Dc min. | 80 mm | |
| Diametro tagliente, max. Dc max. | 80 mm | |
| Tolleranza del diametro tagliente | producenttolerantie | |
| Tolleranza di produzione min. | -0,05 mm | |
| Tolleranza di produzione max. | 0,1 mm | |
| Lunghezza scanalatura per trucioli Lc | 8 mm | |
| Utilizzo per tipo di foro | doorlopend gat | |
| Materiale da taglio | HM | |
| Interfaccia | scheidingspunt 1 | |
| oberes Abmaß Nenndurchmesser | 0,1 mm | |
| unteres Abmaß Nenndurchmesser | -0,05 mm | |
| Lunghezza utile L1 | 8 mm | |
| Direzione di taglio | Tagliente destro | |
| Esecuzione utensile | Supporto in acciaio con inserti per taglio saldati in materiale duro secondo DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Normativa | Werksnorm | |
| Tipi di lavorazione | Foratura dal pieno (BVB) | |
| Collarino colorato | zonder | |
| Tipo di prodotto | Lochschneider | |
| Contenuto | parte singola |
Identification & Classification
| Article number | 215754 | |
| Catalog number | 118500 | |
| EAN / GTIN | 4045197037565 | |
| Manufacturer number | 118500 80 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
Only for flat material up to 4 mm thickness.
Only for flat material up to 4 mm thickness.