{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Electronic torque analyser, maximum torque: 2N·m
Article no.: 2157846
Catalog no.: 654413
Article code:
- Direction of tightening: For right and left-hand tightening
- Torque measuring accuracy: ±1
- Interface: USB interface
- Test certificate: Manufacturer’s test certificate
- IP Index of Protection: IP 40
Product details
Technical Data
| maximum torque | 2 Nm | |
| Direction of tightening | For right and left-hand tightening | |
| Torque measuring accuracy | ±1 % | |
| Interface | USB interface | |
| Test certificate | Manufacturer’s test certificate | |
| Resolution | 0.01 Nm | |
| Measuring range | 0.1 Nm - 2 Nm | |
| Display unit width | 146 mm | |
| Display unit height | 86 mm | |
| Display unit depth | 161 mm | |
| Weight | 2.8 kg | |
| Square socket | 1/4 in | |
| Power supply | Mains-powered | |
| Type of product | Torque analyser | |
| IP Index of Protection | IP 40 |
Identification & Classification
| Article number | 2157846 | |
| Catalog number | 654413 | |
| EAN / GTIN | 4067263138341 | |
| Manufacturer number | 654413 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
For use of mechanical and digital branded torque wrenches (not HCT) and screwdrivers, and setting and checking triggering, indicating, right-hand and left-hand turning torque wrenches and screwdrivers.
Units of measurement: Nm, lbfft, lbfin.
- Display: Large sharp contrast illuminated 2.8 inch TFT display with double scale with viewing angle stability. With memory capacity display.
- Memory capacity: 1000 measurement values with time stamp (incl. date and time) and 20 configurable test cases.
- Modes: Tracking display (Track), trigger point sensing (First-Peak) and peak value display (Peak Hold).
- Attachment: can be attached to flat surfaces (table, wall, etc.) using 4 screws (M10).
- 3 recesses for secure storage of adapters (increaser piece).
- Data output: Available via USB-C. The data can the exported as a .csv file.
- Password protection: available as protection against unauthorised access to the menu (master password) and for verifying test cases. In addition, you can set that reworking a test case that has been performed incorrectly requires input of a password.
- Warning signals: visual (change of colour on the display) and acoustic (buzzer). The pre-warning point can be configured individually. The acoustic warning signal can be disabled if desired.
- Protection class IP40
- Languages: German, English, Spanish, Italian, French.
- Factory settings: Can be reset to the factory settings.
- Displays the software version with the serial number and date of the last calibration. The date of the next calibration can be set on the torque analyser.
Units of measurement: Nm, lbfft, lbfin.
Function:
IP40: Protected against penetration by foreign bodies with ⌀ > 1 mm, however tools and wires should be kept away, and offers no protection against water.
Accuracy:
Clockwise and anti-clockwise: +/- 1%.
Supplied with:
Adapter 1/4 inch square to 1/4 inch hexagon C 6.3 (similar to No. 676950 size 4/4).
Note:
Warning:
Intended use
Reasonably foreseeable misuse
- For testing indicating and triggering torque wrenches as well as for general measurement of torques in the measuring range of the torque tester.
- Torque can be applied clockwise and counter-clockwise.
- For work in industrial environments.
- Before use, allow the unit 30 minutes residence to acclimatise to room temperature.
- Use only when properly and safely secured.
- Check that the device is in perfect functional condition and is safe to operate before use.
- Use only when it is technically in good condition and safe to operate.
- If the device is dropped or collides with other objects, do not use again until it has been thoroughly checked and calibrated.
- Use only recommended adapters and adapter shanks.
- Have the wrench regularly calibrated and adjusted.
Reasonably foreseeable misuse
- Do not exceed the specified torques.
- Do not open the casing.
- Do not use in explosion hazard areas.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- Do not operate outdoors or in rooms with high atmospheric humidity.
- Do not make any unauthorised modifications.
- Do not mount components not in accordance with the specification.
- No torque testing of motorised screwdrivers or spanners.
- Do not use with improper electrical and mechanical installation, operation or cleaning.