{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Tapping chuck, ER synchro, HSK-A 63 short, for ER collet size: 8
Article no.: 2158108
Catalog no.: 338134
Article code:
Product details
Technical Data
| Through-coolant | yes, with max. 80 bar | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Holder type | hollow shank taper HSK | |
| Holder shape | with internal centring | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 63 | |
| Type of mounting | spigot | |
| Shank length | 63 mm | |
| Min. clamping diameter | 0.5 mm | |
| Max. clamping diameter | 5 mm | |
| Body length (tool side) | 83.7 mm | |
| Length compensation by compression | 1 mm | |
| Length compensation by tension | 1 mm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Format | short | |
| Suitable for tapping | yes | |
| Thread | M9×0,5 | |
| With cooling channel bore | yes | |
| Maximum coolant pressure | 80 bar | |
| Interface | joint 1; joint 2 | |
| Type of product | quick-change chuck | |
| Overall length | 141 mm | |
| Overall height | 63 mm | |
| Overall width | 63 mm | |
| Standard | ISO 12164-1 | |
| With thread | yes | |
| Through-coolant available | yes | |
| Material | steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 2158108 | |
| Catalog number | 338134 | |
| EAN / GTIN | 4054631189012 | |
| Manufacturer number | 54160341091 | |
| Manufacturer/responsible person | Eugen Fahrion GmbH & Co. KG Präzisions-Spannwerkze, Forststraße 54, 73667 Kaisersbach, Germany, www.fahrion.de |
Description
Version:
- Extremely low axial forces for low flank pressure and perfect surface quality.
- Torsion damper and compensation mechanism in the circumferential direction.
- Depth of up to 150 mm can be achieved with ⌀10 interference contour (for thread size M0.5-M3).
- Suitable for internal coolant supply of up to 80 bar.
- Suitable for taps and fluteless taps.
- Suitable for right-hand and left-hand threads.
- Suitable for blind and through holes.
- Minimum length compensation in push and pull direction.
- Drastically reduces the flank pressure on old and new CNC machining centres.
Advantage:
- Reliable processes thanks to smooth operation, even under torque load.
- Longer tool life for the tap and fluteless tap.
- Significantly smaller outer diameter than previously available.
- Significantly more internal cooling directly on the tool than conventional synchro chucks (for ER8).
- Concentricity is twice as good, for the lowest flank pressure.
- Damping when reversing the direction of rotation ensures fewer tool breakages.
Supplied with:
Spanner
Note:
Products No. 338131 – 338135 only when used with CENTRO/P collets (No. 309365 – 309372). The weaker the axial force, the better the quality, the lower the wear, the longer the service life, and the safer the process.
CP roller bearing wrench No. 309754 or CP roller bearing wrench for torque No. 309756 must be purchased separately.
CP roller bearing wrench No. 309754 or CP roller bearing wrench for torque No. 309756 must be purchased separately.