{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Alu SlotMachine solid carbide roughing end mill HPC / TPC, DLC, ⌀ h7 DC: 10mm
Article no.: 2160620
Catalog no.: 205282
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Series | Master Alu | |
| Manufacturer’s designation | GARANT Master Alu SlotMachine VHM-Schruppfräser | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01000105 | |
| Holder shape | Standard | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 10 mm | |
| Length of shank LS | 41.3 mm | |
| Holder diameter, upper dimension | 0 mm | |
| Holder diameter, lower dimension | -0.009 mm | |
| Shank type | HA | |
| Tool material | HC-K30 | |
| Standard designation for cutting medium, 2nd Priority | HC-K30 | |
| Standard designation for cutting medium, 3rd Priority | HC-K30 | |
| Machining group, manufacturer-specific | N | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | W | |
| Cutting media, manufacturer’s designation | VHM | |
| Coating | DLC | |
| Cutter diameter Dc | 10 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | h7 | |
| Recess diameter D1 | 9.5 mm | |
| Cutting edge length Lc | 32 mm | |
| Head length L3 | 32 mm | |
| ISO milling cutter type | J | |
| Balancing quality | G 2,5 mit HA | |
| Relief angle | 10 degrees | |
| Side rake angle | 10 degrees | |
| Number of effective cutters (peripheral side) Z | 5 | |
| Number of effective cutters (end face) Z | 5 | |
| Number of central cutting edges | 0 | |
| Twist direction | right-hand | |
| Twist angle | 35 degrees | |
| Helical pitch | 45 mm | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.32 mm | |
| Corner chamfer angle | 45 degrees | |
| Shape identifier, manufacturer-specific | WR | |
| Spacing of the cutters | unequal spacing | |
| Cutting arc angle max. | 60 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Helix angle characteristic | unequal spacing | |
| Interface | joint 1 | |
| Tolerance class | h7 | |
| Gauge length A | 42 mm | |
| Usable length L1 | 38 mm | |
| Overall length L | 80 mm | |
| Functional length | 42 mm | |
| Weight | 87 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | face milling (FPL); shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | yellow | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 3 | |
| Cutting depth min. | 0.32 mm | |
| Max. cutting depth L2 | 10 mm; 32 mm |
Identification & Classification
| Article number | 2160620 | |
| Catalog number | 205282 | |
| EAN / GTIN | 4069515036528 | |
| Manufacturer number | 205282 10 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
500
N
480
N
450
N
120
N
100
N
160
N
200
Description
Version:
For roughing.
Special profile for machining non-ferrous metals. Significant reduction in the chip volume due to targeted chip fragmentation using the special cutter geometry.
As a result of the 5 teeth, even higher feed rates are possible. The end face is supported by an additional stabilising chamfer, which leads to smoother operation during helical plunging.
Special profile for machining non-ferrous metals. Significant reduction in the chip volume due to targeted chip fragmentation using the special cutter geometry.
As a result of the 5 teeth, even higher feed rates are possible. The end face is supported by an additional stabilising chamfer, which leads to smoother operation during helical plunging.
Note:
For HB shanks: use order No. 205283.
HB shanks are available at the same price as HA.
Cutting data for TPC machining in the ToolScout.
HB shanks are available at the same price as HA.
Cutting data for TPC machining in the ToolScout.