{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Softcut®90° shoulder mill with thread, for indexable inserts AO.., MTC
Article no.: 2161384
Catalog no.: 215409
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Series | Softcut® | |
| Interface position | on the machine | |
| Holder type | screw holder | |
| Nominal size of mounting thread | M8 | |
| Shank diameter | 8.5 mm | |
| Shank length | 26 mm | |
| Insert designation | AO.T1104 | |
| Interface | joint 1 | |
| Gauge length | 26 mm | |
| Overall length | 26 mm | |
| Cutting direction | right-hand cutting | |
| Machining method | End milling; circular milling (round milling); countersinking (plunge milling); slot drilling (keyway cutting) | |
| Machining strategy | MTC | |
| Cutter diameter min. | 15.7 mm | |
| Head diameter | 14.5 mm | |
| Milling cutter type | End / face mill | |
| Setting angle | 90 degrees | |
| Relief angle | 12 degrees | |
| Plunge angle max. | 10.9 degrees | |
| Plunge depth max. | 1.6 mm | |
| Cutting direction | right-hand | |
| Number of effective cutters peripheral side | 2 | |
| Spacing of the cutters | unequal spacing | |
| Tool exchange | PowerCard | |
| Diameter of circular interpolation milling min. | 21.1 mm | |
| Diameter of circular interpolation milling max. | 28.6 mm | |
| Circular interpolation milling | 7.8 mm | |
| Content | single part | |
| Type of product | End / face mill | |
| Mounting thread | M8 |
Identification & Classification
| Article number | 2161384 | |
| Catalog number | 215409 | |
| EAN / GTIN | 4069515038683 | |
| Manufacturer number | 215409 15,7/2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
High precision square shoulder mill with irregular pitch for very smooth cutting, very high precision and cutting power. With special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling in large depths, also slotting. General use in all steel materials as well as stainless and acid-resistant steels.