{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack GARANT Vap Tap machine tap HSS-E Form C
Article no.: 2174770
Catalog no.: GG1358
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Number of pieces | 5 pcs. | |
| Series | Vap Tap | |
| Manufacturer’s designation | GARANT Vap Tap Maschinen Gewindebohrer HSS-E Form C | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 2.8 mm | |
| Thread type | metric ISO coarse thread | |
| Nominal diameter of metric thread D | 2.5 mm | |
| Thread D | M2,5x0,45 | |
| Thread pitch | 0.45 mm | |
| Thread tolerance class | ISO 2 6H | |
| Length of tapping part Lc | 7.5 mm | |
| Taper lead angle | 15 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | C | |
| Application for type of drilling | blind hole | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 2.05 mm | |
| Flank angle | 60 degrees | |
| Square-drive width across flats □ | 2.1 mm | |
| Tool material | HSS-E | |
| Coating | vaporised | |
| Interface | joint 1 | |
| Overall length L | 50 mm | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 371 | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | green | |
| Type of product | taps | |
| Content | set |
Identification & Classification
| Article number | 2174770 | |
| Catalog number | GG1358 | |
| EAN / GTIN | 7612428301428 | |
| Manufacturer number | GG1358 M2,5 | |
| Article class | GGN | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
18
N
13
P
18
P
15
P
15
P
6
M
6
N
15
Description
Version:
GARANT Vap Tap general-purpose tap. Can be used reliably in a wide range of materials. Optimised neck and flute length for improved chip evacuation when working on deep threads. High-performance HSS-E tool material with higher vanadium content for improved wear resistance. Surface vaporised for reduced edge build-up.
Same as number: 135805.
Same as number: 135805.
Note:
Up to ≤ M16: contents 5 pcs. per set.
From ≥ M18: contents 3 pcs. per set.
From ≥ M18: contents 3 pcs. per set.