{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Setting master Precimar, Type: 350
Article no.: 2185860
Catalog no.: 439909
Article code:
New product
Click to enlarge image
Fig. similar
Product details
Technical Data
| Plug type, input | F | |
| Suitable for countries | Austria; Belgium; Czech Republic; France; Germany; Netherlands; Poland; Portugal; Spain | |
| Nominal voltage | 100 V; 240 V | |
| AC supply voltage | 230 V | |
| Mains frequency | 50 Hz; 60 Hz | |
| Series | Precimar | |
| Manufacturer’s designation | Einstellgerät Precimar | |
| EX area | no | |
| Power supply | mains-powered | |
| Measuring accuracy | 0.001 mm | |
| Measurement techniques | image processing | |
| Measurement control | PC measurement electronics | |
| Measuring range X | 395 mm | |
| Measuring range Z | 355 mm | |
| Type of product | setting master |
Identification & Classification
| Article number | 2185860 | |
| Catalog number | 439909 | |
| EAN / GTIN | 2000001175972 | |
| Manufacturer number | 5357400 | |
| Manufacturer/responsible person | MAHR GmbH, Carl-Mahr-Straße 1, 37073 Göttingen, Germany, www.mahr.de |
Description
Version:
Precise adjustment of inside and outside comparative measuring instruments, internal micrometers, 2-point internal measuring devices, precision snap gauges and many other measuring instruments.
- Touch display with intuitive operation.
- Very convenient thanks to storage of favourites and reading of measuring equipment via barcode scanner.
- Time and cost savings due to the elimination of setting rings and gauge blocks.
- No loss of accuracy compared to setting rings or gauge block combinations.
Warning:
Intended use
Reasonably foreseeable misuse
- For setting and calibrating external gauges, internal gauges, bore gauges and universal measuring instruments.
- For work in industrial environments.
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
- Use only when it is technically in good condition and safe to operate.
- For exact setting, use the adapters Article-No. 439910 – 439916.
- Use only on a flat and clean base.
- Plug type F for connection to the 230 Volt mains power supply. Use a suitable light-current supply cable for other sockets.
Reasonably foreseeable misuse
- When there are objects or parts of the body in the range of movement, do not move the ceramic gauge blocks.
- Do not apply any heavy stresses to the housing.
- Do not make any unauthorised changes or modifications to it.
- Do not use in explosion hazard areas.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- Not for use as a mobile setting bench.