{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Available alternative:
-
Article no.: 288460
Nail sleeve 8/110 UNH
Article no.: 2197612
Catalog no.: 4786
Article code:
Product details
Technical Data
| With screw | No | |
| With edge | Yes | |
| Professional / DIY | Profi | |
| d0 | 8 mm | |
| Anchor length | 110 mm | |
| Material | Galvanised steel | |
| min. anchorage depth | 40 mm | |
| h2 | 120 mm | |
| Version | without screws | |
| Surface protection | galvanised | |
| Material grade | Other | |
| Anchoring depth | 40 mm | |
| Max. thickness of the attachment | 70 mm |
Packaging units
| 1 Pack | 50 Pieces |
Identification & Classification
| Article number | 2197612 | |
| Catalog number | 4786 | |
| EAN / GTIN | 4048962298833 | |
| Manufacturer number | 542586 | |
| Article class | RNC |
Description
Description:
The Upat UNH nail sleeve is an easy-to-install spring tension sleeve for light fastenings. The UNH is made of corrosion-coated spring steel and, thanks to its geometry, can be hammered into solid building materials in a time-saving through-hole installation. Thanks to its simple installation, no plugs or screws are required. This allows substructures made of wood and metal as well as metal profiles to be fastened quickly and cost-effectively in solid building materials, both indoors and temporarily outdoors.
Advantage:
- Easy fastening: The one-piece nail sleeve requires no additional screws or plugs
- Time-saving installation: The nail sleeve can be inserted directly through the attachment part using push-through mounting
- Flexible application: Thanks to the corrosion-coated spring steel, it can be used indoors and temporarily outdoors
- Secure hold: Thanks to the tensioning of the entire sleeve length in the solid building material
Application Area:
- Concrete
- Lime sand solid brick
- Natural stone with dense structure
- Solid brick
Application Notes:
Function: When the nail sleeve is hammered in, it tightens over the entire length of the drill hole. The component is held in place by the collar, so no screw is required.
Installation: The Upat UNH nail sleeve is installed using through-hole mounting. Drill the hole, clean the drill hole. Drive in the nail sleeve – done!
Tools: Drill, drill press, blow-out plug (UPM AB), hammer
Installation: The Upat UNH nail sleeve is installed using through-hole mounting. Drill the hole, clean the drill hole. Drive in the nail sleeve – done!
Tools: Drill, drill press, blow-out plug (UPM AB), hammer