{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Boccola chiodo 8/110 UNH
Codice art.: 2197612
N. del catalogo: 4786
Codice materiale:
Dettagli prodotto
Dati tecnici
| Con vite | No | |
| Con bordo | Yes | |
| Professionale / Fai da te | Profi | |
| d0 | 8 mm | |
| Lunghezza del tassello | 110 mm | |
| materiale | Galvanised steel | |
| Profondita minima di ancoraggio | 40 mm | |
| h2 | 120 mm | |
| versione | senza viti | |
| Protezione superficiale | galvanised | |
| Classe del materiale | Other | |
| Profondità di ancoraggio | 40 mm | |
| Spessore massimo del componente aggiuntivo | 70 mm |
Unità di imballaggio
| 1 Pacco | 50 pezzi |
Identificazione e classificazione
| Codice articolo | 2197612 | |
| Numero del catalogo | 4786 | |
| EAN / GTIN | 4048962298833 | |
| Codice del produttore | 542586 | |
| Classe dell’articolo | RNC |
Descrizione
Descrizione:
The Upat UNH nail sleeve is an easy-to-install spring tension sleeve for light fastenings. The UNH is made of corrosion-coated spring steel and, thanks to its geometry, can be hammered into solid building materials in a time-saving through-hole installation. Thanks to its simple installation, no plugs or screws are required. This allows substructures made of wood and metal as well as metal profiles to be fastened quickly and cost-effectively in solid building materials, both indoors and temporarily outdoors.
Vantaggi:
- Easy fastening: The one-piece nail sleeve requires no additional screws or plugs
- Time-saving installation: The nail sleeve can be inserted directly through the attachment part using push-through mounting
- Flexible application: Thanks to the corrosion-coated spring steel, it can be used indoors and temporarily outdoors
- Secure hold: Thanks to the tensioning of the entire sleeve length in the solid building material
Area di applicazione:
- Concrete
- Lime sand solid brick
- Natural stone with dense structure
- Solid brick
Note applicative:
Function: When the nail sleeve is hammered in, it tightens over the entire length of the drill hole. The component is held in place by the collar, so no screw is required.
Installation: The Upat UNH nail sleeve is installed using through-hole mounting. Drill the hole, clean the drill hole. Drive in the nail sleeve – done!
Tools: Drill, drill press, blow-out plug (UPM AB), hammer
Installation: The Upat UNH nail sleeve is installed using through-hole mounting. Drill the hole, clean the drill hole. Drive in the nail sleeve – done!
Tools: Drill, drill press, blow-out plug (UPM AB), hammer