{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Threaded rod plug RodForce FGD M6 x 35 with 60 mm threaded rod
Article no.: 2242076
Catalog no.: 6496
Article code:
Product details
Technical Data
| Hardened | No | |
| Version | Mit Gewindestange | |
| Suitable for perforated brick | No | |
| Suitable for wood | No | |
| Suitable for calcium silicate brick | Yes | |
| Suitable for solid brick | Yes | |
| Material | Nylon | |
| Material grade | Nylon | |
| Building material | Solid building material | |
| Suitable for natural stone | No | |
| Suitable for aerated concrete | No | |
| Suitable for plasterboard | No | |
| Colour | grey | |
| Suitable for concrete | Yes | |
| Suitable for aerated concrete | No | |
| With edge | No | |
| Professional / DIY | Profi | |
| Anchor length | 35 mm | |
| Suitable for chipboard | No | |
| Surface protection | Other | |
| Packing | Folding box |
Packaging units
| 1 Pack | 25 Pieces |
Identification & Classification
| Article number | 2242076 | |
| Catalog number | 6496 | |
| EAN / GTIN | 4048962295054 | |
| Manufacturer number | 542108 | |
| Article class | RME |
Description
Advantage:
- The innovative plug geometry allows quick and easy installation of the threaded rod with a few hammer blows.
- The short plug length prevents reinforcement hits and guarantees a secure utilization in reinforced concrete.
- The teeth inside the plug allow standard, metric threads to be held: This saves a large assortment of stud screws.
- Installation without special tools: The only thing needed to set the plug is a hammer.Visible edge of the plug serves as visual setting check and guarantees correct setting.
- The visible edge of the plug serves as visual setting check and guarantees correct setting.
- Easy to check and adjust: To check the setting depth, the closed plug tip is used as a stop point. This predetermined break point also allows the threaded rod to be hammered-in deeper.
Application Area:
- Concrete
- Solid sand-lime brick
- Solid brick
- Suspension for individual pipes
- Plumbing and heating fixings
- Cable and pipe clips
- Ceiling lights
- Consoles
- Mounting rails
Application Notes:
- When hammering-in the threaded rod, the plug expands in four directions as a result of the conical inner geometry.
- The plug is set using pre-positioned installation and this is possible in two different ways: Pre-installation of the threaded rods in the plug with both being hammered into the wall together or pre-inserting of the RodForce into the drill hole followed by hammering-in of the threaded rod.
- The teeth inside the plug mechanically interlock the metric thread securely with the threaded rod.
- The unique elements on the outside of the plug brace against the wall of the drill hole.