{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Tappo RodForce FGD M6 x 35 con asta filettata 10 60
Codice art.: 2242076
N. del catalogo: 6496
Codice materiale:
Dettagli prodotto
Dati tecnici
| Temprato | No | |
| versione | Mit Gewindestange | |
| Idoneo per laterizio forato | No | |
| Idoneo per legno | No | |
| Idoneo per silicato di calcio | Sì | |
| Idoneo per laterizio pieno | Sì | |
| materiale | Nylon | |
| Classe del materiale | Nylon | |
| Materiale da costruzione | Materiale da costruzione solido | |
| Idoneo per pietra naturale | No | |
| Idoneo per calcestruzzo cellulare | No | |
| Idoneo per cartongesso | No | |
| Colore | grigio | |
| Idoneo per calcestruzzo | Sì | |
| Idoneo per calcestruzzo cellulare | No | |
| Con bordo | No | |
| Professionale / Fai da te | Profi | |
| Lunghezza del tassello | 35 mm | |
| Idoneo per pannelli truciolari | No | |
| Protezione superficiale | altri | |
| Imballaggio | scatola |
Packaging units
| 1 Pacco | 25 pezzi |
Identificazione e classificazione
| Codice articolo | 2242076 | |
| Numero del catalogo | 6496 | |
| EAN / GTIN | 4048962295054 | |
| Codice del produttore | 542108 | |
| Classe dell`articolo | RME |
Descrizione
Vantaggi:
- The innovative plug geometry allows quick and easy installation of the threaded rod with a few hammer blows.
- The short plug length prevents reinforcement hits and guarantees a secure utilization in reinforced concrete.
- The teeth inside the plug allow standard, metric threads to be held: This saves a large assortment of stud screws.
- Installation without special tools: The only thing needed to set the plug is a hammer.Visible edge of the plug serves as visual setting check and guarantees correct setting.
- The visible edge of the plug serves as visual setting check and guarantees correct setting.
- Easy to check and adjust: To check the setting depth, the closed plug tip is used as a stop point. This predetermined break point also allows the threaded rod to be hammered-in deeper.
Area di applicazione:
- Concrete
- Solid sand-lime brick
- Solid brick
- Suspension for individual pipes
- Plumbing and heating fixings
- Cable and pipe clips
- Ceiling lights
- Consoles
- Mounting rails
Note applicative:
- When hammering-in the threaded rod, the plug expands in four directions as a result of the conical inner geometry.
- The plug is set using pre-positioned installation and this is possible in two different ways: Pre-installation of the threaded rods in the plug with both being hammered into the wall together or pre-inserting of the RodForce into the drill hole followed by hammering-in of the threaded rod.
- The teeth inside the plug mechanically interlock the metric thread securely with the threaded rod.
- The unique elements on the outside of the plug brace against the wall of the drill hole.