{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Stand-off installation TherMax 8/160 M6 (2)
Article no.: 2242532
Catalog no.: 4923
Article code:
Product details
Technical Data
| Professional / DIY | DIY | |
| Environment | Damp area / Outside | |
| Material | Galvanised steel | |
| Surface protection | galvanised | |
| Building material | Concrete | |
| Anchoring depth | 60 mm | |
| Drive | Hexagonal | |
| Packing | Folding box | |
| Application | Motion detectors | |
| Drill hole depth h1 | 220 mm |
Identification & Classification
| Article number | 2242532 | |
| Catalog number | 4923 | |
| EAN / GTIN | 4006209456842 | |
| Manufacturer number | 045684 | |
| Article class | RMD |
Description
Advantage:
- The stand-off installation allows for the fixture to be adjusted to the exact position required, which avoids pressure marks and damage to the ETICS.
- The plastic cone creates a thermal barrier between the fixture and the inner fixture, and offers an energy-optimised fixing.
- The glass fibre reinforced plastic cone cuts its own way through the ETICS with a positive fit, and allows for a simple and fast installation without the need for any special tools.
- Combining with the universal plug UX provides secure anchoring in the substrate.
- Without the UX plug, direct installation in a wooden substrate is possible after pre-drilling, too.
Supplied with:
2 x TherMax
2 x UX 10 x 60
2 x SX Plus 5 x 25
2 x Cover cap
2 x UX 10 x 60
2 x SX Plus 5 x 25
2 x Cover cap
Application Area:
- Concrete
- Vertically perforated brick
- Hollow blocks made from lightweight concrete
- Perforated sand-lime brick
- Solid sand-lime brick
- Building brick
- Aerated concrete
- Wood
For the thermally separated fixing of:
- Signs
- Lighting
- Letter boxes
- Motion detectors
- Downpipes
- Lightning rods
- Blind guide rails
Application Notes:
- The TherMax 8 is suitable for pre-positioned installation.
- The self-tapping, glass fibre reinforced cone cuts its own way through the plaster into the insulation during installation.
- The anti-cold cone uses a thermal barrier to minimise heat losses.
- Installation does not require any special tools.
- For use in wood without a plug, the wood (see the footnote beneath the load table) and plaster must be pre-drilled: TherMax 8: d02 = 14 mm, h02 = 50 mm.
- The assortment offers connection possibilities using metric screws M6, self-tapping screws 6.3 mm, chipboard screws 6.0 mm, and 4.5-5.5 mm chipboard screws when using a SX Plus 5 plug.