{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Stand-off installation TherMax 10/180 M10 (2)
Article no.: 540221
Catalog no.: 4923
Article code:
Product details
Technical Data
| Profi / DIY | DIY | |
| d0 | 12 mm | |
| SW | 13 mm | |
| Umgebung | Feuchtraum / Außenbereich | |
| Material | Galvanisch verzinkter Stahl | |
| Oberflächenschutz | verzinkt | |
| Baustoff | Beton | |
| Verpackung | Faltschachtel | |
| Verankerungstiefe | 70 mm | |
| Antrieb | Sechskant | |
| Anwendung | Bewegungsmelder | |
| M | M10 | |
| Bohrlochtiefe h1 | 240 mm |
Packaging units
| 1 Pack | 5 Pieces | |
| 1 Pallet | 180 Pieces |
Identification & Classification
| Article number | 540221 | |
| Catalog number | 4923 | |
| EAN / GTIN | 4048962143270 | |
| Manufacturer number | 517165 | |
| Article class | RMD |
Description
Advantage:
- The stand-off installation allows for the fixture to be adjusted to the exact position required, whereby pressure marks and damage to the ETICS are avoided.
- The plastic cone creates a thermal barrier between the fixture and the inner fixture, and offers an energy-optimised fixing.
- The glass fibre reinforced plastic cone cuts its own way through the ETICS with a positive fit, and allows for a simple and fast installation without the need for any special tools.
- Combining with the universal plug UX provides a secure anchoring in the substrate.
- Without UX plug direct mounting in wood substrate is possible after pre-drilling.
Supplied with:
2 x TherMax
2 x UX 12 x 70
2 x Cover cap
2 x UX 12 x 70
2 x Cover cap
Application Area:
- Concrete
- Vertically perforated brick
- Hollow blocks made from lightweight concrete
- Perforated sand-lime brick
- Solid sand-lime brick
- Building brick
- Aerated concrete
- Wood
For the thermally separated fixing of:
- Signs
- Lighting
- Letter boxes
- Motion detectors
- Downpipes
- Lightning rods
- Blind guide rails
Application Notes:
- The TherMax 10 system is suitable for pre-positioned installation.
- The self-tapping, glass fibre reinforced cone cuts its own way through the plaster into the insulation during installation.
- The anti-cold cone uses a thermal barrier to minimise heat losses.
- Installation without any special tools.
- For use in wood without plug, the wood (footnote below load table) as well as the plaster has to be pre-drilled: TherMax 10: d02 = 18 mm, h02 = 50 mm.
- The assortment offers connection possibilities using metric screws M6/8/10, self-tapping screws 6.3 mm, chipboard screws 6.0 mm or chipboard screws 4.5 - 5.5 mm when using a SX Plus 5 plug.