{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Woodruff keyseating cutter, uncoated, ⌀ DC × LC h11 × e8: 28,5X7mm
Article no.: 249388
Catalog no.: 194010
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Max. cutting depth, Full slot milling | 9.1 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.08 mm | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder version | metric | |
| Holder size, metric | 10 mm | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 10 mm | |
| Length of shank LS | 40 mm | |
| Shank type | HB | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Schlitzfräser | |
| Tool material | HSS-E | |
| Machining group | K (cast iron); N (non-ferrous metals); P (steel) | |
| Cutter diameter Dc | 28.5 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | h11 | |
| Cutting edge length Lc | 7 mm | |
| Number of effective cutters (peripheral side) Z | 10 | |
| Corner / edge | 1 | |
| Corner version | sharp-edged | |
| Corner chamfer angle | 90 degrees | |
| Direction of infeed | horizontal | |
| Number of clamping slots | 10 | |
| Cutting media, manufacturer’s designation | HSS-CO5 | |
| Vorschub pro Zahn in | steel < 750 N/mm2 | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Overall length L | 63 mm | |
| Weight | 60 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 850 D/F | |
| Shape letter standard number | D/F | |
| Machining method | slot milling (FNU) | |
| Colour ring | without | |
| Type of product | woodruff keyseating milling cutter, T-slot milling cutter | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling |
Identification & Classification
| Article number | 249388 | |
| Catalog number | 194010 | |
| EAN / GTIN | 4045197109361 | |
| Manufacturer number | 194010 28,5X7 | |
| Article class | 11W | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
250
N
70
P
35
P
28
K
22
N
35
Description
Version:
Peripheral cutting, alternate set teeth (staggered).
The sides of the teeth are ground to give clearance and thus cannot jam in the component.
Special surface treatment.
The sides of the teeth are ground to give clearance and thus cannot jam in the component.
Special surface treatment.
Note:
For milling Woodruff keyways to DIN 6888 or for milling small slots.