{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Woodruff keyseating cutter, uncoated, ⌀ DC × LC h11 × e8: 32,5X5mm
Article no.: 249390
Catalog no.: 194010
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Schlitzfräser | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01201005 | |
| Shank diameter DS | 12 mm | |
| Shank length LS | 45 mm | |
| Shank type | HB | |
| Tool material | HSS Co 10 | |
| Cutting media, manufacturer’s designation | HSS-CO5 | |
| Coating | uncoated | |
| Cutter diameter Dc | 32.5 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | e8 | |
| Cutting edge length Lc | 5 mm | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters (peripheral side) Z | 12 | |
| Direction of infeed | horizontal | |
| Number of clamping slots | 12 | |
| Interface | joint 1 | |
| Gauge length A | 26 mm | |
| Overall length L | 71 mm | |
| Weight | 80 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 850 D/F | |
| Machining method | slot milling (FNU) | |
| Colour ring | without | |
| Type of product | woodruff keyseating milling cutter, T-slot milling cutter | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth L2 | 5 mm; 10.1 mm |
Identification & Classification
| Article number | 249390 | |
| Catalog number | 194010 | |
| EAN / GTIN | 4045197109385 | |
| Manufacturer number | 194010 32,5X5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
250
N
70
P
35
P
28
K
22
N
35
Description
Version:
Peripheral cutting, alternate set teeth (staggered).
The sides of the teeth are ground to give clearance and thus cannot jam in the component.
Special surface treatment.
The sides of the teeth are ground to give clearance and thus cannot jam in the component.
Special surface treatment.
Note:
For milling Woodruff keyways to DIN 6888 or for milling small slots.