{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Aluminium shoulder mill with plain shank, for indexable inserts ZD..
Article no.: 301090
Catalog no.: 211755
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Interface position | on the machine; on the workpiece | |
| Holder type | Plain shank | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 0320 mm | |
| Holder tolerance class | h6 | |
| Shank diameter | 40 mm | |
| Shank type | HA | |
| Cutter diameter min. | 40 mm | |
| Setting angle | 90 degrees | |
| Relief angle | 10 degrees | |
| Ramp distance | 27.56 mm | |
| Number of cutters peripheral side | 3 | |
| Tool exchange | PowerCard | |
| Shank type | Plain shank | |
| Diameter of shaft | 32 mm | |
| Interface | joint 1; joint 2 | |
| Gauge length | 50 mm | |
| Overall length | 110 mm | |
| Cutting direction | right-hand cutting | |
| Machining method | End milling; circular milling (round milling); countersinking (plunge milling) | |
| Type of product | End / face mill | |
| Content | single part | |
| Max. cutting depth | 9 mm |
Identification & Classification
| Article number | 301090 | |
| Catalog number | 211755 | |
| EAN / GTIN | 4062406681906 | |
| Manufacturer number | 211755 40/3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
High-performance milling system for high cutting speeds. Absolutely precise insert bedding. Exceptional torsional stiffness thanks to optimised protection against centrifugal force.
Attention:
Before using the indexable insert No. 211776 ALU (r = 5.0 mm) and 211777 ALU (r = 6.0 mm), the insert seats of the carrier must be modified.
Note:
Warning:
Intended use
Reasonably foreseeable misuse
- For work in industrial environments.
- A coolant stream is necessary for it to function.
- A coolant stream is necessary for it to function.
- Modular cutters are interchangeable equipment for use in CNC milling machines.
- Modular cutters for machining plastic or aluminium workpieces.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- Use only when it is technically in good condition and safe to operate.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not subject it to blows, impacts or heavy loads.
- Only to be used in line with the intended use.