{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Aluminium indexable milling cutter with bore, for indexable inserts ZD..
Article no.: 301150
Catalog no.: 211759
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Cutter diameter | 40 mm | |
| Body diameter | 30 mm | |
| Mounting hole diameter | 16 mm | |
| Setting angle | 90 degrees | |
| Relief angle | 10 degrees | |
| Number of effective cutters (peripheral side) | 3 | |
| Number of effective cutters (end face) | 3 | |
| Type of fastening for insert | P | |
| Gauge length | 40 mm | |
| Overall length | 40 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | steel support with soldered hard material cutter inserts to DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Machining method | End milling; circular milling (round milling) | |
| Type of product | shoulder mill |
Identification & Classification
| Article number | 301150 | |
| Catalog number | 211759 | |
| EAN / GTIN | 4062406681777 | |
| Manufacturer number | 211759 40/3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
High-performance milling system for high cutting speeds. Absolutely precise insert bedding. Exceptional torsional stiffness thanks to optimised protection against centrifugal force.
Attention:
Before using the indexable insert No. 211776 ALU (r = 5.0 mm) and 211777 ALU (r = 6.0 mm), the insert seats of the carrier must be modified.
Note:
Warning:
Intended use
Reasonably foreseeable misuse
- For work in industrial environments.
- A coolant stream is necessary for it to function.
- A coolant stream is necessary for it to function.
- Modular cutters are interchangeable equipment for use in CNC milling machines.
- Modular cutters for machining plastic or aluminium workpieces.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- Use only when it is technically in good condition and safe to operate.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not subject it to blows, impacts or heavy loads.
- Only to be used in line with the intended use.