Version:
Wood and wood-based materials or wood-based panels
Functionality / assembly
FAFS is suitable for push-through installation.
With the separately available setting tool, attached to the bit, the adjusting screw can be screwed into the attachment part flush with the surface or slightly countersunk.The component spacing can be infinitely adjusted with the bit without a setting tool and by changing the direction of rotation. The clip retains its position in the attachment during adjustment.For wooden battens with a thickness 30 mm or hard wood as well as for installation close to the edge, pre-drilling Ø6 mm is recommended. If used in accordance with the approval, the specifications of ETA-19/0175 must be observed.
Use in masonry is possible with fischer DuoPower 6x50 or UX 6x50 and Ø6 mm pre-drilling.
Disassembly is possible through the thread on the clip of the adjusting screw.
With the bit and attached setting tool, the adjusting screw can be removed by turning anti-clockwise.
Advantage:
The countersunk clip of the screw does not rotate during adjustment. The screw head retains its position in the attachment. Flush mounting without protruding screw heads is ensured.The special functional principle allows stepless adjustment. The attachment can be aligned very precisely.
The thread on the clip allows it to be unscrewed from the attachment. Disassembly is therefore possible.
The fischer PowerFast II chipboard screw used ensures quick tightening and fast screwing in.
Application Area:
- Timber substructures
- Window frames
- Door frames
- Wall panelling