{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Power-Fast adjustment screws T25 with shank, galvanized steel FAFS 5x120 (558882)
Article no.: 311684
Catalog no.: 3303
Article code:
Product details
Technical Data
| Thread type | Wood thread |
Identification & Classification
| Article number | 311684 | |
| Catalog number | 3303 | |
| EAN / GTIN | 4048962428360 | |
| Manufacturer number | 558882 | |
| Article class | RJA |
Description
Version:
Functionality / assembly
Advantage:
- The countersunk clip of the screw does not rotate during adjustment. The screw head maintains its position in the attachment part. Flush installation is ensured, without protruding screw heads.
- The special operating principle allows for stepless adjustment. The attachment part can be aligned with a high level of precision.
- The thread on the clip enables an unscrewing from the attachment part, facilitating disassembly.
- The PowerFast II chipboard screw used ensures the screw bites quickly into the material and screws in fast.
Application Area:
- Wood and wooden materials or wooden panels
- Wooden substructures
- Window frames
- Door frames
- Wall covering
Application Notes:
- FAFS is suitable for push-through installation.
- With the separately available setting tool attached to the bit, the adjusting screw can be screwed into the attachment flush with the surface or slightly countersunk.
- The bit can be used to steplessly adjust the component distance, without the setting tool and by changing the direction of rotation. The clip maintains its position in the attachment part during adjustment.
- Pre-drilling a 6 mm diameter hole is recommended for wooden boards > 30 mm thick, or hardwoods, as well as assembly near an edge. For application according approval, the specifications of ETA-19/0175 must be observed.
- The screw can be used in masonry with the fischer DuoPower 6x50 or UX 6x50 and after pre-drilling a 6 mm diameter hole.
- Disassembly is possible, thanks to the thread on the clip of the adjusting screw.
- With the bit and the setting tool attached, the adjusting screw can be dismantled by turning it anti-clock-wise.