{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap machine tap HSS-E-PM Form B 6H+0.1, AlTiX, M: M8
Article no.: 327645
Catalog no.: 132735
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Manufacturer’s designation | GARANT Master Tap Maschinen-Gewindebohrer HSS-E-PM Form B 6H | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL; ZYL00802105 | |
| Holder shape | straight clamping flat | |
| Holder version | metric | |
| Holder size, metric | 0080 mm | |
| Type of mounting | spigot | |
| Holder tolerance class | h9 | |
| Shank diameter DS | 8 mm | |
| Shank length LS | 47 mm | |
| Thread type | M | |
| Thread nominal diameter metric | 8 mm | |
| Thread | M8x1.25 | |
| Thread pitch | 1.25 mm | |
| Thread tolerance class | 6HX+0,1 | |
| Chisel edge diameter | 6.63 mm | |
| Width across flats | 6.2 mm | |
| Length of tapping part Lc | 22.5 mm | |
| Tap infeed length | 5 mm | |
| Taper lead angle | 7.8 degrees | |
| Number of teeth | 3 | |
| Twist direction | neutral, straight | |
| Twist angle | 0 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | B | |
| Pilot pin | without guiding pin | |
| Application for type of drilling | Through hole | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 6.8 mm | |
| Flank angle | 60 degrees | |
| Square-drive width across flats □ | 6.2 mm | |
| Tool material | HSS-E-PM | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Coating | AlTiX | |
| Interface | joint 1 | |
| Gauge length A | 93.6 mm | |
| Usable length L1 | 24 mm | |
| Overall length L | 90 mm | |
| Weight | 32 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 371 | |
| Machining method | thread processing internal | |
| Colour ring | green | |
| Type of product | Taps |
Identification & Classification
| Article number | 327645 | |
| Catalog number | 132735 | |
| EAN / GTIN | 4062406718985 | |
| Manufacturer number | 132735 M8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
30
N
35
N
20
P
30
P
30
P
25
P
12
P
8
M
10
M
8
K
20
N
20
Description
Version:
Universal taps, designed for use in a wide spectrum of materials with high process reliability.
Tolerance class: ISO2/6H + 0.1
- HSS-E-PM tool material for a high degree of wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum swarf evacuation.
Tolerance class: ISO2/6H + 0.1
Application:
For components which are galvanised or shrink slightly when hardened.
Recommendation:
We recommend increasing the size of the tapping hole ⌀ by the tolerance allowance.