{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SFS Facade rivets AP AlMg/1.4301 AP14-50210-S KL 10-16
Article no.: 418939
Catalog no.: 9281
Article code:
Product details
Technical Data
| L | 21 mm | |
| Drill-Ø | 5.1 mm | |
| d | 3.25 mm | |
| K | 2 mm | |
| Mandrel material | stainless | |
| Surface | blank | |
| Head shape | Flat round head | |
| Material rivet | Aluminium | |
| Typ | AP14-50210-S-blank | |
| s | 1.5 mm | |
| d2 | 14 mm | |
| Clamping length | 10 mm - 16 mm | |
| d1 | 5 mm |
Packaging units
| 1 Pack | 250 Pieces | |
| 1 Carton | 250 Pieces |
Identification & Classification
| Article number | 418939 | |
| Catalog number | 9281 | |
| EAN / GTIN | 7611188149318 | |
| Manufacturer number | AP14-50210-S | |
| Article class | SDF |
Description
Description:
Sleeve: AlMg
Pin: stainless steel 1.4301
Pin: stainless steel 1.4301
Note:
AP façade rivets are available in both blank and painted versions.
The configurable item numbers must be used for items to be painted.
However, for technical reasons, painted fasteners cannot be ordered via the eShop. Please order these from us by email or telephone. We require the correct colour or a colour sample for this.
The delivery time for products with head painting is between 7 and 14 days.
The configurable item numbers must be used for items to be painted.
However, for technical reasons, painted fasteners cannot be ordered via the eShop. Please order these from us by email or telephone. We require the correct colour or a colour sample for this.
The delivery time for products with head painting is between 7 and 14 days.
Application Area:
Fastening façade cladding to aluminium-subframe
Application Notes:
Customer-specific colour design of the rivet heads possible thanks to over 1000 different colour finishes.
Drilling diameter 5.1 mm
For processing, we recommend a sliding point nose piece and a drilling jig for one-handed, centric drilling of the substructure. Installation is carried out using the AccuBird setting tool or manual riveting tool.
Drilling diameter 5.1 mm
For processing, we recommend a sliding point nose piece and a drilling jig for one-handed, centric drilling of the substructure. Installation is carried out using the AccuBird setting tool or manual riveting tool.