{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Softcut® shoulder mill with thread, for indexable inserts AP..
Article no.: 480414
Catalog no.: 215615
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Series | Softcut® | |
| Interface position | on the machine | |
| Holder type | screw holder | |
| Nominal size of mounting thread | M10 | |
| Shank diameter | 10.5 mm | |
| Shank length | 30 mm | |
| Tolerance Class | h6 | |
| Interface | joint 1 | |
| Overall length | 30 mm | |
| Cutting direction | right-hand cutting | |
| Machining method | End milling; circular milling (round milling); countersinking (plunge milling) | |
| Machining strategy | MTC | |
| Cutter diameter min. | 20 mm | |
| Head diameter | 18 mm | |
| Max. cutting edge length | 6 mm | |
| Setting angle | 90 degrees | |
| Relief angle | 11 degrees | |
| Plunge angle max. | 0.68 degrees | |
| Plunge depth max. | 16.85 mm | |
| Cutting direction | right-hand | |
| Number of effective cutters peripheral side | 5 | |
| Spacing of the cutters | unequal spacing | |
| Tool exchange | PowerCard | |
| Diameter of circular interpolation milling min. | 38 mm | |
| Diameter of circular interpolation milling max. | 38 mm | |
| Content | single part | |
| Type of product | End / face mill | |
| Mounting thread | M10; M12; M16; M6; M8 |
Identification & Classification
| Article number | 480414 | |
| Catalog number | 215615 | |
| EAN / GTIN | 4045197409966 | |
| Manufacturer number | 215615 20/5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless and acid-resistant steels.
Spare part:
Pack of insert screws No. 219827 (6IP; 0.45 Nm).