{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Softcut® shoulder mill with thread, for indexable inserts AP..
Article no.: 537879
Catalog no.: 215615
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Interface position | on the machine | |
| Holder type | screw holder | |
| Nominal size of mounting thread | M6 | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 6.5 mm | |
| Cooling lubricant | yes | |
| Series | Softcut® | |
| Interface | joint 1 | |
| Insert thickness T | 2.38 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | AP.. 0602.. | |
| Overall length L | 20 mm | |
| Machining method | circular milling (round milling) (FZI); shoulder milling (FEC) | |
| Cutter diameter min. D1 | 10 mm | |
| Head length L | 20 mm | |
| Milling cutter type | end / face mill | |
| Setting angle | 90 degrees | |
| Relief angle | 11 degrees | |
| Plunge angle max. αmax | 1.67 degrees | |
| Plunge depth max. ae max | 6.85 mm | |
| Number of effective cutters (peripheral side) | 2 | |
| Number of indexable inserts | 2 | |
| Spacing of the cutters | unequal spacing | |
| Tool exchange | PowerCard | |
| Diameter of circular interpolation milling min. | 18 mm | |
| Diameter of circular interpolation milling max. | 18 mm | |
| Circular interpolation milling ap | 0.7 mm | |
| Machining strategy | MTC | |
| Indexable insert size | 06 | |
| Content | single part | |
| Type of product | end / face mill | |
| Mounting thread M | M6 |
Identification & Classification
| Article number | 537879 | |
| Catalog number | 215615 | |
| EAN / GTIN | 4045197601841 | |
| Manufacturer number | 215615 10/2 | |
| Article class | 21O | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless and acid-resistant steels.
Spare part:
Pack of insert screws No. 219827 (6IP; 0.45 Nm).