{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Injection mortar FIS VL 300 T
Article no.: 540223
Catalog no.: 6136
Article code:
Product details
Technical Data
| Professional / DIY | Profi | |
| Durability | 12 mo | |
| Packing | Cartridge | |
| Content | 300 ml | |
| Scale elements | 150 | |
| Packaging type (bonded mortar) | Injection system |
Packaging units
| 1 Carton | 12 Pieces | |
| 1 Pallet | 648 Pieces |
Identification & Classification
| Article number | 540223 | |
| Catalog number | 6136 | |
| EAN / GTIN | 4048962162950 | |
| Manufacturer number | 519557 | |
| Article class | RMB |
Description
Advantage:
- The FIS VL is approved for use in cracked concrete and masonry, and achieves a high load-bearing capacity in these conditions.
- The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility.
Supplied with:
1 x Cartridge 300 ml
2 x static mixer FIS MR Plus
2 x static mixer FIS MR Plus
Application Area:
- Steelwork constructions
- Timber constructions
- Guard rails
- Façades
- Staircases
- Steel brackets
- Machines
- Masts
- Awnings
- Canopies
- Gates
- Consoles
- Pipelines
- Gratings
- Satellite antennas
Approved for anchorings in:
- Concrete C20/25 to C50/60, cracked
- Hollow blocks made from lightweight concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Solid sand-lime brick
- Solid brick
- Rebar connections
- Aerated concrete
- Concrete C12/15
- Hollow blocks made from concrete
Application Notes:
- The FIS VL is a 2-component injection mortar based on vinyl ester.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
- The mortar is extruded bubble free from the drill hole base.
- The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
- The injection mortar FIS VL 300 T can be applied without a special tool using a standard dispenser.
- Partially used cartridges can be reused by changing the static mixer.