{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Ancorante chimico 300 T
Codice art.: 540223
N. del catalogo: 6136
Codice materiale:
Dettagli prodotto
Dati tecnici
| Professionale / Fai da te | Profi | |
| Durabilita | 12 mo | |
| Imballaggio | cartuccia | |
| Contenuto | 300 ml | |
| Elementi graduati | 150 | |
| Tipo di confezione (malta chimica) | Sistema di iniezione |
Packaging units
| 1 Scatola | 12 pezzi | |
| 1 Pallet | 648 pezzi |
Identificazione e classificazione
| Codice articolo | 540223 | |
| Numero del catalogo | 6136 | |
| EAN / GTIN | 4048962162950 | |
| Codice del produttore | 519557 | |
| Classe dell`articolo | RMB |
Descrizione
Vantaggi:
- The FIS VL is approved for use in cracked concrete and masonry, and achieves a high load-bearing capacity in these conditions.
- The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility.
Fornitura:
1 cartuccia 300 ml + 2 mixer statici
Area di applicazione:
- Steelwork constructions
- Timber constructions
- Guard rails
- Façades
- Staircases
- Steel brackets
- Machines
- Masts
- Awnings
- Canopies
- Gates
- Consoles
- Pipelines
- Gratings
- Satellite antennas
Approved for anchorings in:
- Concrete C20/25 to C50/60, cracked
- Hollow blocks made from lightweight concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Solid sand-lime brick
- Solid brick
- Rebar connections
- Aerated concrete
- Concrete C12/15
- Hollow blocks made from concrete
Note applicative:
- The FIS VL is a 2-component injection mortar based on vinyl ester.
- Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
- The mortar is extruded bubble free from the drill hole base.
- The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
- The injection mortar FIS VL 300 T can be applied without a special tool using a standard dispenser.
- Partially used cartridges can be reused by changing the static mixer.