{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of gloves MASTER CUT B OIL, Glove size: 11
Article no.: 720945
Catalog no.: 094417
Article code:
Product details
Technical Data
| Series | Master Cut | |
| Manufacturer’s designation | GARANT Master Cut Oil | |
| Quality and test seal | Oeko-Tex® Standard 100 | |
| Contents pairs | 1 pair | |
| Cut protection class, EN 388 | B | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | X | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | 2 | |
| Resistance to cuts (TDM) | B | |
| Impact protection | not defined | |
| Material of coating, the palms of the hands | Nitrile | |
| Material of coating, 3/4 coating | Nitrile; Nitrile foam; Nitrile; Nitrile foam | |
| EN 388 code | 4X42B | |
| Colour | grey; black | |
| Type of product | gloves | |
| Area of application | cut protection | |
| Glove size | 10; 11; 12; 6; 7; 8; 9; 10; 11; 12; 6; 7; 8; 9; 11 | |
| Accuracy of fit | fitting | |
| Scope of application | all-round; precision | |
| Reuse | reusable | |
| Unit | Pair | |
| Knitted technology (fineness) | 18G | |
| Standard | EN 388; EN ISO 21420 | |
| Backing material | HPPE fibre | |
| Coating | 3/4 coating; the palms of the hands | |
| Lined | no | |
| Characteristics | DMF free; oil grip; reinforced crook of the thumb; wet grip | |
| Protection category | II | |
| Overall length | 250 mm |
Identification & Classification
| Article number | 720945 | |
| Catalog number | 094417 | |
| EAN / GTIN | 4062406273569 | |
| Manufacturer number | 094417 11 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
GARANT Master Cut Oil cut-resistant gloves. Close-fitting and extremely comfortable thanks to 18-gauge knit. Pleasant nitrile micro-foam coating for exceptionally good sense of touch and high degree of dexterity. Therefore highly suitable for precise handling of sharp-edged parts. Also ideal for wet or oily environments thanks to 3/4 nitrile coating that extends over the knuckles. A second coating layer of sanded nitrile on the palm of the hand and fingers ensures a particularly secure grip. With reinforced thumb joint for longer working life.
Very flexible cut-resistant gloves with cut resistance level B. Highly suitable for oily working environments with moderate cut hazards, e.g. on cutting machines.
Very flexible cut-resistant gloves with cut resistance level B. Highly suitable for oily working environments with moderate cut hazards, e.g. on cutting machines.
Standard:
EN 388; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasions, blisters and cutting hazards. For precision work.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
Reasonably foreseeable misuse
- Offer no protection against chemical, microbiological, thermal or electrical hazards.
- Do not wear when close to rotating machine parts.
- Do not continue using gloves following contact with sharp-edged items.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.