{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap machine tap HSS-E-PM, AlTiX, NPT: 1/16-27
Article no.: 722479
Catalog no.: 138105
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Manufacturer’s designation | GARANT Master Tap Maschinen-Gewindebohrer HSS-E-PM, AlTiX, NPT | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 6 mm | |
| Thread type | NPT | |
| Cutter diameter D | 7.895 mm | |
| Nominal diameter of thread (inches) D | 0.063 in | |
| Thread D | 1/16-27 NPT | |
| Thread pitch | 0.941 mm | |
| Turns per inch | 27 | |
| Length of tapping part Lc | 15.8 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees | |
| Taper ratio | 1:16 | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | C | |
| Application for type of drilling | through hole; blind hole | |
| Number of clamping slots | 3 | |
| Core hole diameter | 5.95 mm; 6.15 mm | |
| Tapping hole minimum depth | 12 mm | |
| Flank angle | 60 degrees | |
| Micrometer standard | yes | |
| Maximum check gauge diameter | 6.39 mm | |
| Check dimension tolerance | 0.05 | |
| Square-drive width across flats □ | 4.9 mm | |
| Tool material | HSS-E-PM | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Coating | AlTiX | |
| Interface | joint 1 | |
| Overall length L | 90 mm | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | green | |
| Type of product | taps |
Identification & Classification
| Article number | 722479 | |
| Catalog number | 138105 | |
| EAN / GTIN | 4045197984371 | |
| Manufacturer number | 138105 1/16-27 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
30
N
35
N
20
P
30
P
30
P
25
P
12
P
8
M
10
M
8
K
20
N
20
Description
Version:
Universal taps, designed for use in a wide spectrum of materials with high process reliability.
- HSS-E-PM tool material for maximum wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum chip evacuation.
Application:
Tapered pipe threads (NPT) to ANSI B1.20.1, for threads with sealants. See the table for the specified minimum size of the tapping hole.
Recommendation:
Tapping hole ⌀ A:
Pre-drill a plain hole without using a reamer.
Tapping hole ⌀ B:
Pre-drill a plain hole and then ream it using a 1:16 taper reamer (see No. 162650). The taper bore ⌀ can then be checked laterally by reference to the Dmax check dimension (see table). Variant B for drilling the tapping hole offers the best process reliability for the tapping operation.
Pre-drill a plain hole without using a reamer.
Tapping hole ⌀ B:
Pre-drill a plain hole and then ream it using a 1:16 taper reamer (see No. 162650). The taper bore ⌀ can then be checked laterally by reference to the Dmax check dimension (see table). Variant B for drilling the tapping hole offers the best process reliability for the tapping operation.