{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap machine tap HSS-E-PM, AlTiX, NPT: 1/2-14
Article no.: 722483
Catalog no.: 138105
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 0160 mm | |
| Holder tolerance class | h9 | |
| Shank diameter | 16 mm | |
| Thread type | NPT | |
| Thread nominal diameter inch | 0.5 in | |
| Thread | NPT1/2 | |
| Thread pitch | 1.814 mm | |
| Turns per inch | 14 | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 4 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees | |
| Taper ratio | 1:16 | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | C | |
| Application for type of drilling | Through hole; Blind hole | |
| Number of clamping slots | 4 | |
| Core hole diameter | 17.5 mm; 17.85 mm | |
| Tapping hole minimum depth | 22.9 mm | |
| Flank angle | 60 degrees | |
| Micrometer standard | yes | |
| Maximum check gauge diameter | 18.32 mm | |
| Check dimension tolerance | 0.05 | |
| Square-drive width across flats | 12 mm | |
| Tool material | HSS-E-PM | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Coating | AlTiX | |
| Interface | joint 1 | |
| Usable length | 35.06 mm | |
| Overall length | 125 mm | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Machining method | thread processing internal | |
| Colour ring | green | |
| Type of product | Taps |
Identification & Classification
| Article number | 722483 | |
| Catalog number | 138105 | |
| EAN / GTIN | 4045197901934 | |
| Manufacturer number | 138105 1/2-14 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
30
N
35
N
20
P
30
P
30
P
25
P
12
P
8
M
10
M
8
K
20
N
20
Description
Version:
Universal taps, designed for use in a wide spectrum of materials with high process reliability.
- HSS-E-PM tool material for maximum wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum chip evacuation.
Application:
Tapered pipe threads (NPT) to ANSI B1.20.1, for threads with sealants. See the table for the specified minimum size of the tapping hole.
Recommendation:
Tapping hole ⌀ A:
Pre-drill a plain hole without using a reamer.
Tapping hole ⌀ B:
Pre-drill a plain hole and then ream it using a 1:16 taper reamer (see No. 162650). The taper bore ⌀ can then be checked laterally by reference to the Dmax check dimension (see table). Variant B for drilling the tapping hole offers the best process reliability for the tapping operation.
Pre-drill a plain hole without using a reamer.
Tapping hole ⌀ B:
Pre-drill a plain hole and then ream it using a 1:16 taper reamer (see No. 162650). The taper bore ⌀ can then be checked laterally by reference to the Dmax check dimension (see table). Variant B for drilling the tapping hole offers the best process reliability for the tapping operation.