{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Tool24 Smartline – upright cabinet fitted with tool sockets, for tool shanks: SK30
Article no.: 690053
Catalog no.: 979101
Article code:
Click to enlarge image
Click to enlarge image
Detail of the base-supported pull-out frame.
Click to enlarge image
Click to enlarge image
Detail
Click to enlarge image
Lochraster 37 mm
Click to enlarge image
Lagerung voreingestellter Werkzeuge
- Vertical pull-out frame load capacity: 600
- Cabinet housing internal load capacity: 2,400
- Drawer runner extension: Anti-tilt lock
- Cylinder lock: modular lock barrel
- Colour selection: RAL 9002, 7035, 7016, 5012, 5005
Product details
Technical Data
| Vertical pull-out frame load capacity | 600 kg | |
| Cabinet housing internal load capacity | 2,400 kg | |
| Drawer runner extension | Anti-tilt lock | |
| Cylinder lock | modular lock barrel | |
| Colour selection | RAL 9002, 7035, 7016, 5012, 5005 | |
| Series | Tool24 Smartline | |
| Height | 2,000 mm | |
| Width | 717 mm | |
| Depth | 750 mm | |
| Pull-out frame drawers width | 155 mm | |
| Vertical pull-out frame usable height | 1,750 mm | |
| Number of pull-out frames | 4 | |
| Number of tool carriers No. 970130 | 24 | |
| Number of tool sockets | 408 | |
| Axial spacing A | 69 mm | |
| Weight | 320 kg | |
| Type of product | Tool issuing system |
Identification & Classification
| Article number | 690053 | |
| Catalog number | 979101 | |
| EAN / GTIN | 4062406133955 | |
| Manufacturer number | 979101 SK30 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
The pull-out shelves are supported from the base and equipped with central locking (can be used for emergency release). The end faces of the hot-dip galvanised frames of the pull-out shelves have holes at intervals of 37 mm for mounting tool carriers, support rails, shelf trays, and perforated panels. The pull-out frames are equipped with an anti-tilt device. The pull-out frames open automatically. This ensures quick access to the tools.
- Storage of pre-set tools.
- Only for use in conjunction with a Tool24 Smartline Master Unit system.
- Available with 14 different configurations (for different tool shanks SK, VDI, C, HSK).
- Supplied with 24 carrier rails.
- Mountings suitable for tool stands, support rails, shelf trays and perforated tool panels.
- Distributed safe working load per pull-out frame: 600 kg.
- Maximum upright cabinet load: 2400 kg.
- Locking system for emergency release.
Application:
Automatic industrial vending solution for storage and management of tools and C-items.
Colour:
Body RAL 7035 light grey, pull-out frames RAL 7016 anthracite powder-coated.
Note:
Upright cabinets place increased demands on the floor, since the pull-out frames run directly on the floor! The following pre-requirements for the installation site must be satisfied absolutely by the customer:
These upright cabinets can only be used in conjunction with a Tool24 Smartline Master Unit system No. 979001 S11M or No. 979001 S11M-EN, Tool24 PickOne Master Unit system No. 979201 DE or No. 979211 EN, and Tool24 Locker Master Unit system No. 979300 DE or No. 979310 EN.
- Flatness tolerance for finished floors as per DIN 18202.
- Angularity of a maximum of 2 millimetres over the measurement length of 1 metre.
- The subsurface must have a sufficient load-bearing capacity.
- Only place on ground that is absolutely level.
These upright cabinets can only be used in conjunction with a Tool24 Smartline Master Unit system No. 979001 S11M or No. 979001 S11M-EN, Tool24 PickOne Master Unit system No. 979201 DE or No. 979211 EN, and Tool24 Locker Master Unit system No. 979300 DE or No. 979310 EN.