{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Spessimetro elettronico, Modello: GM120
Codice art.: 191921
N. del catalogo: 478480
Codice materiale:
Dettagli prodotto
Dati tecnici
| Imballaggio | Valigetta | |
| Metrologia | digitale | |
| Configurabile | no | |
| Tipo di prodotto | Spessimetro | |
| Lunghezza complessiva L | 20 mm | |
| Larghezza complessiva B | 120 mm | |
| Altezza complessiva H | 195 mm | |
| Contenuto | parte singola | |
| Materiale | metallo; plastica |
Identificazione e classificazione
| Codice articolo | 191921 | |
| Numero del catalogo | 478480 | |
| EAN / GTIN | 2050002078697 | |
| Classe dell`articolo | 47F | |
| Produttore/persona responsabile | MFP Messtechnik und Fertigungstechnologie GmbH, An der Corvinuskirche 22-26, 31515 Wunstorf, Deutschland |
Descrizione
Esecuzione:
The newly developed measuring device uses a tactile sensor that can be inserted into narrow gaps of less than 0.5 mm. It therefore replaces feeler gauges and thickness gauges in a wide range of applications where users were previously only able to carry out qualitative inspections and had to determine quantitative measured values through a time-consuming process of trial and error.
The gapMaster® offers significant advantages over capacitive and optical gap measurement methods. Firstly, its measuring probe can also be inserted into very deep gaps that are visually inaccessible. Secondly, its tactile measurement with very low measuring forces means it is not dependent on the material of the test specimen. These features make the gapMaster® a superior gap measuring device in many fields of application.
The mobile, highly user-friendly device displays all the information required for the measurement process and its analysis on its 7-inch screen. Inspection plans can be loaded, and measurement data can be temporarily stored and transmitted to a central office via WLAN.
For measurements on fans and turbines, the gapMaster® offers special sensors that can quickly and accurately measure gaps between the rotor and housing with a repeatability of up to 0.01 mm. In the automotive sector, too, the replaceable gap sensor is designed differently depending on the application, meaning every measurement task can be optimally solved. For an overview of the available sensors, click on No. 478485.
The gapMaster® offers significant advantages over capacitive and optical gap measurement methods. Firstly, its measuring probe can also be inserted into very deep gaps that are visually inaccessible. Secondly, its tactile measurement with very low measuring forces means it is not dependent on the material of the test specimen. These features make the gapMaster® a superior gap measuring device in many fields of application.
The mobile, highly user-friendly device displays all the information required for the measurement process and its analysis on its 7-inch screen. Inspection plans can be loaded, and measurement data can be temporarily stored and transmitted to a central office via WLAN.
For measurements on fans and turbines, the gapMaster® offers special sensors that can quickly and accurately measure gaps between the rotor and housing with a repeatability of up to 0.01 mm. In the automotive sector, too, the replaceable gap sensor is designed differently depending on the application, meaning every measurement task can be optimally solved. For an overview of the available sensors, click on No. 478485.
Proprietà:
- Gap width 0.2 to 18 mm
- Resolution up to 0.002 mm
- Accuracy up to 0.01 mm
- Sensor width 6 to 20 mm
- Sensor length 50 to 170 mm – optionally up to over 500 mm
Vantaggi:
- Measurement capabilities in hard-to-reach places
- Direct, tactile measurement – sensor in the gap
- Low measuring forces
- Quantitative measurement that does not depend on the test specimen material
- Gap progression can be recorded in depth
Uso:
- Sheet metal processing
- Plastics industry
- Wood processing
- Automotive and aerospace engineering
- Fans and turbines
- Functional gaps on
- rotating machinery
- Cutting kerfs
- Gaps between test specimen and gauges
- Assembly gaps on bodywork and in interiors
Per:
Digital measuring probe No. 478485 K30; K29; K28; K27.
Nota:
The technical data provided is only achieved when using the measured value display unit including software in conjunction with the digital measuring probes No. 478485 intended for this purpose.