{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Bullone di ancorag. in acc. zinc. FAZ II Plus 20/60
Codice art.: 2005784
N. del catalogo: 3310
Codice materiale:
Dettagli prodotto
Dati tecnici
| Classe di resistenza al fuoco | R120 | |
| t fix | 60 mm | |
| d0 | 20 mm | |
| SW | 30 mm | |
| Numero di dadi | 1 | |
| Omologazione sismica | C1 / C2 | |
| materiale | zincato a freddo | |
| h2 | 185 mm | |
| Fissaggio con utensile di espansione | No | |
| Azionamento | Esagonale | |
| Idoneo per calcestruzzo fessurato | Sì | |
| hef | 100 mm | |
| Rilevante per la protezione antincendio | Sì | |
| M | M20 | |
| Vetro | 37 x 3 mm | |
| Idoneo per calcestruzzo non fessurato | Sì | |
| Professionale / Fai da te | Profi | |
| Ambiente | Dentro | |
| Con collarino | No | |
| Numero di rondelle | 1 | |
| Protezione superficiale | Con zincatura galvanica/elettrolitica | |
| Imballaggio | scatola | |
| Spessore massimo del componente aggiuntivo | 60 mm | |
| l | 202 mm | |
| M x ls | M20 x 84 mm |
Packaging units
| 1 Pacco | 5 pezzi | |
| 1 Pallet | 780 pezzi |
Identificazione e classificazione
| Codice articolo | 2005784 | |
| Numero del catalogo | 3310 | |
| EAN / GTIN | 4048962462289 | |
| Codice del produttore | 564603 | |
| Classe dell`articolo | RMC |
Descrizione
Vantaggi:
- Quick and easier assembly without the need for drill hole cleaning (M8-M24).
- Numerous approval certificates for different substrate materials (concrete C12/15-C80/95, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
- With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
- The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.
- The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point.
- The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
- The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation.
Area di applicazione:
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Façades
- Timber constructions
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15 (classification available)
- Concrete C80/95 (classification available)
- Steel fiber concrete (classification available)
- Solid sand-lime brick (classification available)
Note applicative:
- The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
- When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
- The anchor is set in line with the approval once the preset installation torque is achieved.
- In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.