{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Bullone di ancoraggio A4 FAZ II Plus 20/30 R
Codice art.: 2005810
N. del catalogo: 3311
Codice materiale:
Dettagli prodotto
Dati tecnici
| Numero di dadi | 1 | |
| materiale | acciaio inossidabile | |
| Idoneo per solaio alveolare in calcestruzzo | No | |
| Fissaggio con utensile di espansione | No | |
| Azionamento | Esagonale | |
| Idoneo per calcestruzzo fessurato | Sì | |
| hef | 100 mm | |
| Rilevante per la protezione antincendio | Sì | |
| M | M20 | |
| Imballaggio | scatola | |
| l | 172 mm | |
| Classe di resistenza al fuoco | R120 | |
| t fix | 30 mm | |
| d0 | 20 mm | |
| SW | 30 mm | |
| Omologazione sismica | C1 / C2 | |
| h2 | 155 mm | |
| Classe del materiale | altri | |
| Vetro | 37 x 3 mm | |
| Idoneo per calcestruzzo non fessurato | Sì | |
| Professionale / Fai da te | Profi | |
| Ambiente | Zona umida / Esterno | |
| Con collarino | No | |
| Numero di rondelle | 1 | |
| Protezione superficiale | non trattato | |
| Spessore massimo del componente aggiuntivo | 30 mm | |
| M x ls | M20 x 54 mm |
Packaging units
| 1 Pacco | 4 pezzi | |
| 1 Pallet | 1040 pezzi |
Identificazione e classificazione
| Codice articolo | 2005810 | |
| Numero del catalogo | 3311 | |
| EAN / GTIN | 4048962462562 | |
| Codice del produttore | 564631 | |
| Classe dell`articolo | RMM |
Descrizione
Vantaggi:
- Quick and easier assembly without the need for drill hole cleaning (M8-M24).
- Numerous approval certificates for different substrate materials (concrete C12/15-C80/95, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
- With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
- The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
- An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).
- The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation.
- The variable anchorage depths allow a millimetre-accurate adjustment to the loads.
Area di applicazione:
- Steel constructions
- Guard rails
- Consoles
- Ladders
- Cable trays
- Machines
- Staircases
- Façades
- Timber constructions
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15 (classification available)
- Concrete C80/95 (classification available)
- Steel fiber concrete (classification available)
- Solid sand-lime brick (classification available)
Note applicative:
- The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
- When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
- The anchor is set in line with the approval once the preset installation torque is achieved.
- In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.