{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
ancoraggio con rondella grande HBS Acciaio zincato FAZ II Plus HBS 16/160
Codice art.: 2006581
N. del catalogo: 3318
Codice materiale:
Dettagli prodotto
Dati tecnici
| Classe di resistenza al fuoco | R120 | |
| d0 | 16 mm | |
| t fix | 160 mm | |
| SW | 24 mm | |
| ls | 180 mm | |
| Numero di dadi | 1 | |
| Omologazione sismica | C1 / C2 | |
| materiale | zincato a freddo | |
| h2 | 270 mm | |
| Fissaggio con utensile di espansione | No | |
| Azionamento | Esagonale | |
| M | M16 | |
| hef | 85 / 65 mm | |
| Con collarino | No | |
| Numero di rondelle | 1 | |
| Protezione superficiale | Con zincatura galvanica/elettrolitica | |
| T inst | 110 Nm | |
| Imballaggio | scatola | |
| Tipo | FAZ II Plus 16/160 HBS gvz | |
| l | 278 mm | |
| M x ls | M16 x 189 mm |
Identificazione e classificazione
| Codice articolo | 2006581 | |
| Numero del catalogo | 3318 | |
| EAN / GTIN | 4048962463101 | |
| Codice del produttore | 564685 | |
| Classe dell`articolo | RMC |
Descrizione
Vantaggi:
- The FAZ II Plus HBS with extra large washer as per the wood construction standard DIN 1052 included in the delivery ensures even better force transfer for the fixation of sills and beams, for example.
- Quick and easier assembly without the need for drill hole cleaning (M8-M24).
- Numerous approval certificates for different substrate materials (concrete C12/15-C80/95, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
- With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
- The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
- An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).
- The variable anchorage depths allow a millimetre-accurate adjustment to the loads.
Area di applicazione:
- Anchor plates with slotted holes
- Façade sub-structures with slotted holes
- Timber constructions
- Tension anchor
- Anchoring of wooden beams
Approved for:
- Beton C20/25 bis C50/60, gerissen und ungerissen
- Concrete C12/15 (classification available)
- Concrete C80/95 (classification available)
- Steel fiber concrete (classification available)
- Solid sand-lime brick (classification available)
Note applicative:
- The FAZ II Plus HBS is suitable for pre-positioned and push-through installation and is also ideal for stand-off installations.
- Before installation, place the hex nut and washer as per the wood construction standard into the optimum position.
- When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
- The anchor is set in line with the approval once the preset installation torque is achieved.
- In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.