{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
PowerFull Viti a filettatura completa svasata T40 in acciaio blu galvanizzato
Codice art.: 2006653
N. del catalogo: 3891
Codice materiale:
Dettagli prodotto
Dati tecnici
| Attuatore | esalobata | |
| Tronco | senza gambo | |
| Altezza della testa lk | 8 mm | |
| Lunghezza filettatura | 180 mm | |
| Materiale | acciaio con trattamento termico | |
| Ø nucleo | 6.2 mm | |
| Finitura | zincato blu | |
| Forma testa | Tête fraisée | |
| Tipo di filettatura | filetto di legno |
Identificazione e classificazione
| Codice articolo | 2006653 | |
| Numero del catalogo | 3891 | |
| EAN / GTIN | 4048962445503 | |
| Codice del produttore | 562948 | |
| Classe dell`articolo | RJA |
Descrizione
Descrizione:
con punta autoperforante
Vantaggi:
- The tip geometry makes low axial and edge distances as well as high loads possible.
- The PowerFull II with a diameter of 10 mm has a distinctly different geometry to the diameters 6 and 8 mm. The 10 mm screw has a drill point which creates a pre-drilling effect and stops the long screws running off centre. There is less splintering risk is reduced and the screw-in torque is reduced.
- The screw geometry significantly improves the pull-out load capacity and optimises the screw-in torque.
Area di applicazione:
- Connection main beam / substructure
- Chevron-purlin connection
- Reinforcement of notches
- Openings
- Beam false edges
- Beam reinforcements
- Strengthening perpendicular to the grain
- Coupling purlins
- Support reinforcement / transverse pressure reinforcement
- Shear wood fixing (for roof insulation)
- Refurbishment of old beams
- Footing beams
- Element connections in wood frame construction
- Pressed steel-wood connections
- Solid hardwood of material strength classes C14 - C40 in accordance with EN 338 / EN 14081-1
- New: Solid beech, ash or oak in accordance with EN 338 / EN 14081-1, with pre-drilling
- Glued-laminated timber of at least material strength class GL24c in accordance with EN 1194 / EN 14080
- New: Glued-laminated timber made of beech, ash or oak according to European Technical Approval or the national regulations applicable at the installation site, with pre-drilling
- Laminated veneer lumber LVL in accordance with EN 14374
- Glued-solid timber Duo and Trio beams in accordance with EN 14080 or the national regulations applicable at the installation site
- Cross-laminated timber according to European Technical Approval or the national regulations applicable at the installation site
- Construction beech in line with approval Z-9.1-838 and Z-9.1-837 and FST according to ETA-14/0354, with pre-drilling
Note applicative:
- Screws with a countersunk head can be flush-mounted.