{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
FPF ll Viti per costr. in legno fil.parz., testa svasata fliangata T40 znb 8x80
Codice art.: 2097924
N. del catalogo: 3904
Codice materiale:
Dettagli prodotto
Dati tecnici
| Attuatore | esalobata | |
| Tronco | con gambo | |
| Altezza della testa lk | 5.5 mm | |
| Materiale | acciaio con trattamento termico | |
| Lunghezza filettatura | 60 mm | |
| Finitura | zincato blu | |
| Ø nucleo | 5.4 mm | |
| Forma testa | Tête fraisée | |
| Tipo di filettatura | filetto di legno |
Packaging units
| 1 Pacco | 50 pezzi | |
| 1 Pallet | 13600 pezzi |
Identificazione e classificazione
| Codice articolo | 2097924 | |
| Numero del catalogo | 3904 | |
| EAN / GTIN | 4048962465792 | |
| Codice del produttore | 566355 | |
| Classe dell`articolo | RJA |
Descrizione
Descrizione:
Die fischer PowerFast FPF II STP ist eine galvanisch verzinkte, blau passivierte Schraube mit Teilgewinde und Innenstern-Aufnahme. Der Stufensenkkopf kann wie der normale Senkkopf auch einfach versenkt werden und hat zusätzlich den Vorteil höherer Auszugswerte durch den grossen Kopfdurchmesser. Die Ausführung mit Teilgewinde ermöglicht das feste Aneinanderziehen von Holzelementen.
Vantaggi:
- The new, patented core miller geometry enables precise milling and good extraction of the wood dust. This allows small edge and center distances and makes various wood constructions possible.
- The screw tip with the three ribs provides fast biting and pre-milling at the same time. Fast setting is ensured, the splitting behavior is noticeably reduced for the user.
- The increased thread pitch significantly reduces the installation time, allowing the user to complete projects more economically.
- The high performance easy-glide coating reduces screw-in torque. For longer battery life and a smooth installation.
- The newly designed shank-miller is optimally matched to the core-miller and reduces the screw-in torque.
- In contrast to a standard flange head, the step countersunk head can be completely countersunk in the wood and does not protrude. This allows a second component to lie flush or to be screwed on.
Area di applicazione:
- Wood-wood connections
- Steel panel-wood connections
- Rafter-purlin connection
- Substructures
- Fixing of on-rafter insulation
Approved for:
- Glued-laminated timber
- Cross-laminated timber
- Laminated veneer plywood panels
- Oriented strand boards (e.g. OSB panels)
- Solid structural timber
- Glued timber boards on solid wood
- Soft wood (e.g. Douglas, spruce, pine, fir, etc.)
- Solid wood made of beech or ash
- Glued laminated timber made of beech, ash or oak
- LVL laminated veneer lumber
- Construction beech
- Laminated duo- and trio-beams
Note applicative:
- Partially threaded screws can clamp wooden components firmly against each other.
- In contrast to the flange head screw, the step countersunk head may be screwed flush with the surface. This means that the screw head does not protrude.