{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Kleiberit 605.1 1K-STP Kleber D4 750g
Codice art.: 214856
N. del catalogo: 98051
Codice materiale:
Dettagli prodotto
Dati tecnici
| Contenuto | 750g | |
| Gruppo di stress (DIN EN 204) | D2 | |
| Tempo aperto | ca 8 Minuten | |
| Fascio | bottiglia | |
| Colore | beige | |
| Base | STP-ibrido | |
| temperatura di esercizio | +5°C bis +30°C | |
| indicazione d'avvertimento | attenzione | |
| portata | dentro + fuori | |
| Indicazione di pericolo | H317 Può provocare una reazione allergica cutanea.; H319 Provoca grave irritazione oculare. |
Identificazione e classificazione
| Codice articolo | 214856 | |
| Numero del catalogo | 98051 | |
| EAN / GTIN | 4027616023472 | |
| Codice del produttore | 605.1 |
Descrizione
Descrizione:
A real problem solver for trade and industry
Adhesives based on silane-terminated polymers (STP adhesives) create highly resilient bonds and are becoming increasingly popular. The wide range of possible applications and excellent processing properties make these adhesive systems real all-rounders.
Adhesives based on silane-terminated polymers (STP adhesives) create highly resilient bonds and are becoming increasingly popular. The wide range of possible applications and excellent processing properties make these adhesive systems real all-rounders.
Vantaggi:
- Fast and bubble-free curing
- Adhesion to painted surfaces, many plastics and metals even without sanding
- Paintable
- Processable from +5 °C to 30 °C
- No warping of the carrier board with one-sided coating
- No pressing pressure is required for straight joining surfaces. Stack pressure is sufficient
- No water content, therefore no swelling of the glue joints with e.g. MDF
- Very economical
- No foam formation
- Combines the advantages of film, lacquer and PUR glues
Area di applicazione:
- Manufacture of wall elements and other non-load-bearing structures made of wood and wood-based materials
- Surface bonding of different materials such as: mineral building boards, ceramic materials, concrete materials, rigid foams, wood, glass, metals and many plastics
Note applicative:
The glue can be applied to the substrates using a brush, roller, notched trowel or nozzle system. It is sufficient to apply adhesive to one side of the less porous joining part.
No pressing pressure is required for the cross-linking process. The parts to be joined may only need to be fixed in place. Protect the pressing surfaces from leaking adhesive by applying silicone paper.
Further processing of the glued parts is possible after approx. 1-2 hours, final strength is achieved after approx. 24 hours.
No pressing pressure is required for the cross-linking process. The parts to be joined may only need to be fixed in place. Protect the pressing surfaces from leaking adhesive by applying silicone paper.
Further processing of the glued parts is possible after approx. 1-2 hours, final strength is achieved after approx. 24 hours.