{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Cat. Nr.:
Ancorante composito (lungo) M20x210/150 UHB-INJECT-A L
Codice art.: 2197630
N. del catalogo: 4538
Codice materiale:
Dettagli prodotto
Dati tecnici
| Diametro della carota di perforazione | 25 mm | |
| Filettatura | M20 | |
| materiale | Galvanised steel | |
| Larghezza tra le piastre | 30 mm | |
| versione | Con thread esterno | |
| Coppia di serraggio per l'installazione tinst | 100 Nm | |
| Profondità di ancoraggio | 210 mm | |
| Lunghezza | 389 mm | |
| Spessore massimo del componente aggiuntivo | 150 mm | |
| Applicazione | Dry area | |
| Profondità del foro h1 | 216 mm |
Identificazione e classificazione
| Codice articolo | 2197630 | |
| Numero del catalogo | 4538 | |
| EAN / GTIN | 4000657022512 | |
| Codice del produttore | 546904 |
Descrizione
Descrizione:
The Upat UHB composite anchor meets the highest standards and is ideal for installation. The special anchor geometry allows for minimal centre-to-centre and edge distances and ensures reliable expansion behaviour. Thanks to its wide range of approvals, the composite anchor is particularly suitable for fastening heavy loads in cracked and non-cracked concrete, e.g. for railings, masts and steel structures.
Vantaggi:
- Wide range of approvals: ETA concrete approval option 1 and fire protection test
- Coordinated system: Optimally coordinated system with high performance thanks to the combination of UPM 66 injection mortar and UHB composite anchors
- Optimal load transfer: The bond between the injection mortar and the cone anchor geometry enables optimal load transfer
- Wide range of applications: Also suitable for bridge railings in accordance with guideline drawing GEL 14
- Fastening close to edges: Minimal edge and centre distances with high load-bearing capacity
- Time-saving installation: Hollow drilling is possible in accordance with approvals and reduces installation time
- Flexible installation: Suitable for pre-installation and push-through installation
- Stainless steel (R): For fastenings outdoors or in damp rooms
- Galvanised steel (gvz): For fastenings in dry indoor areas
- Long anchoring depth (L): For maximum tensile load
- Short anchoring depth (S): For minimal installation effort
Area di applicazione:
Approved for:
- Concrete C20/25 to C50/60, cracked and uncracked
- Concrete C12/15
Note applicative:
Drill hole, clean drill hole and fill with filler. Glue anchor in place. Screw on attachment – done.