{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Cat. Nr.:
Esiste un’alternativa per questo articolo:
-
Codice art.: 635877
Ancorante composito M16 UKA3 Plus
Codice art.: 2197714
N. del catalogo: 4522
Codice materiale:
Dettagli prodotto
Dati tecnici
| d0 | 18 mm | |
| adatto per | ASTA M16 / IST M12 | |
| h1 | 125 mm | |
| Profondita minima di ancoraggio | 125 mm |
Identificazione e classificazione
| Codice articolo | 2197714 | |
| Numero del catalogo | 4522 | |
| EAN / GTIN | 4000657021799 | |
| Codice del produttore | 539952 |
Descrizione
Descrizione:
The Upat UKA3 Plus composite anchor is a proven, high-performance fastening system consisting of a mortar cartridge and threaded rod. The system has ETA approval for cracked and uncracked concrete and is also suitable for use in natural stone with a dense structure. Common applications include heavy steel structures, railings, stairs, support feet and silos.
Vantaggi:
- Approved fastening: According to European Technical Assessment for cracked and uncracked concrete (ETA Option 1) and fire protection testing
- No drill hole cleaning: The glass cartridge clings to the drill hole wall, eliminating the need for cleaning the drill hole
- No waste: Not too much, not too little – one drill hole, one cartridge, always the right amount of mortar
- Free of hazardous substances: According to European Chemicals Regulation (REACH)
- Carefree working: Approved for water-filled drill holes
- Long shelf life: Up to 36 months
- Cold-resistant use: Can be used at temperatures as low as -15°C
- Reduced time expenditure: Thanks to short curing time and quick, easy installation
Area di applicazione:
Approved for anchoring in:
- Concrete C20/25 to C50/60, cracked and uncracked
Note applicative:
Function: The hardener is stored separately from the resin and quartz sand in the glass cartridge. When the anchor is vibrated into the drill hole, the glass cartridge containing the hardener, resin and quartz sand is destroyed and mixed with the drill dust. The reaction produces a fast-curing synthetic resin mortar that firmly bonds the anchor to the drill hole without the need for cleaning.
Installation: The Upat UKA3 Plus composite anchor is installed with the Upat ASTA anchor rod in a pre-insertion or push-through installation and with the Upat IST internal thread anchor in a pre-insertion installation. Drill the hole, insert the cartridge, vibrate the anchor rod/internal thread anchor into place, allow to cure – done. The ASTA anchor rod and the IST internal thread anchor must be vibrated into the drill hole with the cartridge using a drill in hammer-drill mode. The temperature in the building material must not fall below the specified minimum value during the curing of the mortar. Minimum cartridge temperature -15°C
Tools: Drill, drill machine, setting tool (MW-SDS plus). For sizes M8-M20, the corresponding installation aid is included in each package.
Installation: The Upat UKA3 Plus composite anchor is installed with the Upat ASTA anchor rod in a pre-insertion or push-through installation and with the Upat IST internal thread anchor in a pre-insertion installation. Drill the hole, insert the cartridge, vibrate the anchor rod/internal thread anchor into place, allow to cure – done. The ASTA anchor rod and the IST internal thread anchor must be vibrated into the drill hole with the cartridge using a drill in hammer-drill mode. The temperature in the building material must not fall below the specified minimum value during the curing of the mortar. Minimum cartridge temperature -15°C
Tools: Drill, drill machine, setting tool (MW-SDS plus). For sizes M8-M20, the corresponding installation aid is included in each package.