{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Alternativa disponibile:
-
Codice art.: 476298
Ancorante composito in acciaio inossidabile (lungo) M16x145/
Codice art.: 2197854
N. del catalogo: 4540
Codice materiale:
Dettagli prodotto
Dati tecnici
| Classe di resistenza al fuoco | R120 | |
| Filettatura | M16 | |
| d0 | 18 mm | |
| SW | 24 mm | |
| Condizioni di applicazione | Outdoor and damp areas | |
| materiale | Stainless steel | |
| versione | Con thread esterno | |
| M | M16 | |
| Elementi graduati della malta | 11 | |
| Con cartuccia di malta | No | |
| T inst | 60 Nm | |
| Profondità di ancoraggio | 145 mm | |
| Tipo | UHB-Inject A L | |
| Spessore massimo del componente aggiuntivo | 60 mm | |
| l | 230 mm | |
| Applicazione | Outdoors and damp areas | |
| Profondità del foro h1 | 151 mm |
Packaging units
| 1 Pacco | 10 pezzi |
Identificazione e classificazione
| Codice articolo | 2197854 | |
| Numero del catalogo | 4540 | |
| EAN / GTIN | 4000657026404 | |
| Codice del produttore | 546955 | |
| Classe dell`articolo | RNQ |
Descrizione
Descrizione:
The Upat UHB composite anchor meets the highest standards and is ideal for installation. The special anchor geometry allows for minimal centre-to-centre and edge distances and ensures reliable expansion behaviour. Thanks to its wide range of approvals, the composite anchor is particularly suitable for fastening heavy loads in cracked and non-cracked concrete, e.g. for railings, masts and steel structures.
Vantaggi:
- Wide range of approvals: ETA concrete approval option 1 and fire protection test
- Coordinated system: Optimally coordinated system with high performance thanks to the combination of UPM 66 injection mortar and UHB composite anchors
- Optimal load transfer: The bond between the injection mortar and the cone anchor geometry enables optimal load transfer
- Wide range of applications: Also suitable for bridge railings in accordance with guideline drawing GEL 14
- Fastening close to edges: Minimal edge and centre distances with high load-bearing capacity
- Time-saving installation: Hollow drilling is possible in accordance with approvals and reduces installation time
- Flexible installation: Suitable for pre-installation and push-through installation
- Stainless steel (R): For fastenings outdoors or in damp rooms
- Galvanised steel (gvz): For fastenings in dry indoor areas
- Long anchoring depth (L): For maximum tensile load
- Short anchoring depth (S): For minimal installation effort
Area di applicazione:
Approved for:
- Concrete C20/25 to C50/60, cracked and uncracked
- Concrete C12/15
Note applicative:
Drill hole, clean drill hole and fill with filler. Glue anchor in place. Screw on attachment – done.