{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Vite per cemento con testa spentata e trasmissione TX 4x40 FBS (Cable Clamp)
Codice art.: 2219677
N. del catalogo: 3329
Codice materiale:
Dettagli prodotto
Dati tecnici
| Professionale / Fai da te | Profi | |
| Ambiente | Dentro | |
| Condizioni di applicazione | Dentro | |
| materiale | zincato a freddo | |
| Dimensione bit (TX) | 20 | |
| Protezione superficiale | Con zincatura galvanica/elettrolitica | |
| Forma testa | Tête fraisée | |
| Imballaggio | scatola |
Unità di imballaggio
| 1 Pacco | 200 pezzi |
Identificazione e classificazione
| Codice articolo | 2219677 | |
| Numero del catalogo | 3329 | |
| Codice del produttore | 579372 | |
| Classe dell’articolo | RMC |
Descrizione
Vantaggi:
- The concrete screw in diameter 4 is ideal for the installation of cable clamps.
- Quick and easy assembly and disassembly using a ordless screwdriver , tangential impact wrench or manual installation.
- The recommended loads for concrete (cracked and non-cracked concrete) make the application more secure.
- The concrete screw FBS 4 offer the possibility for use in masonry like solid sand-lime bricks, for a flexible use in different substrates.
- Two embedment depths enable high flexibility for example for plaster bridging and a precise adaption.
- Fire resistant values according R120 enable the use in case of fire.
- The sawtooth geometry enables fast cutting into the base material.
- The expansion-free anchorage system (undercut) enables low edge and axial spacings.
Area di applicazione:
- Ideal for Cable Clamps
- Eletrical installations
- Sanitary, heating and air conditioning installations
- Surface-mounted sockets
Recommended loads for:
- Concrete starting at C20/25, cracked and non-cracked
- Masonry with out of solid building materials with a dense structure, such as solid sand-lime bricks
Note applicative:
- Drill hole cleaning is necessary.
- The concrete screw FBS 4 is recommended for the push-through installation.
- We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket, or a cordless screwdriver or manual installation by hand.
- The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control).