{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
FAZ II Plus 8/50 HCR Ancorante in acciaio alta resistenza al
Codice art.: 2241780
Codice materiale:
Dettagli prodotto
Identificazione e classificazione
| Codice articolo | 2241780 | |
| Numero del catalogo | 3312 | |
| EAN / GTIN | 4048962462623 | |
| Codice del produttore | 564637 | |
| Classe dell’articolo | RMM |
Descrizione
Vantaggi:
- Quick and easier assembly without the need for drill hole cleaning (M8-M24).
- Numerous approval certificates for different substrate materials (concrete C12/15-C80/95, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.
- With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
- The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
- An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16).
- The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation.
- The variable anchorage depths allow a millimetre-accurate adjustment to the loads.
Area di applicazione:
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15 (classification available)
- Concrete C80/95 (classification available)
- Steel fiber concrete (classification available)
- Solid sand-lime brick (classification available)
- Steel constructions
- Guard rails
- Consoles
- Tunnels
- Swimming pools
- Lifts
- Lifting platforms
- Conveyor belts
- Pumps
- Ladders
- Cable trays
- Machines
- Staircases
- Façades
- Timber constructions
Note applicative:
- The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
- When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
- The anchor is set in line with the approval once the preset installation torque is achieved.
- In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.
- In case of seismic demands, the annular gap can be filled using the filling disc FFD.
- For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength ≥ 50N/mm² e.g.: FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation.