{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Ancoraggio ad impatto TermoZ CNplus 8/330
Codice art.: 2242514
N. del catalogo: 5951
Codice materiale:
Dettagli prodotto
Dati tecnici
| Professionale / Fai da te | Profi | |
| Lunghezza del tassello | 330 mm | |
| Profondita minima di ancoraggio | 35 mm | |
| Profondità di ancoraggio | 35 mm | |
| Azionamento | TX25 | |
| Imballaggio | scatola |
Identificazione e classificazione
| Codice articolo | 2242514 | |
| Numero del catalogo | 5951 | |
| EAN / GTIN | 4048962278606 | |
| Codice del produttore | 540387 | |
| Classe dell`articolo | RMH |
Descrizione
Vantaggi:
- TermoZ CNplus is a hammerset anchor with the option to be screw set. The plug is suitable for all building material and insulation types. Through the flexible use the warehouses and ordering processes are reduced.
- With the fast and simple hammerset installation the plugs set too deep can be readjusted with the aid of the screwdriver. This saves working time and helps to avoid fixing marks.
- During the screw installation the TermoZ CNplus can be set countersunk or flush. For different set results only one plug is required.
- Moreover the screw installation enables an accurate setting due to an optimum application on the insulation surface. Also with soft insulation.
- The compound nail ensures a high energy efficiency with the countersunk screw installation, because there is nearly no heat transmission.
Area di applicazione:
- Building material classes A, B, C, D, E
- Concrete
- Full blocks made from concrete
- Building brick
- Solid sand-lime brick
- Hollow blocks made from lightweight concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Lightweight aggregate concrete
- Aerated concrete
- Attachment of ETICS insulating boards on concrete and masonry
- Flush installation in ETICS insulating boards, e.g. polystyrene and mineral wool
- Countersunk installation in ETICS insulating boards, e.g. polystyrene and mineral wool, incl. a closing cap for covering
Note applicative:
- The plug is set in push-through installation.
- Simple, fast setting by driving the compound nail in using a standard hammer.
- The setting process with the screwdriver is performed flush with a standard Bit T 25.
- For countersunk installation the setting tool CNplus is required. The insulation disk is covered with a closing cap.
- Non-load bearing layers, such as adhesive and old plaster, are included in the maximum useful length.