{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Inserto per fresatura SPKN 1203 EDSR, per testine di misura, HB7535
Codice art.: 249318
N. del catalogo: 213540
Codice materiale:
Dettagli prodotto
Dati tecnici
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | SPKN 1203 EDSR | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Wide insert B | 12.7 mm | |
| Thickness of the insert S | 3.18 mm | |
| Length of cutting insert L | 12.7 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 12.7 mm | |
| Diameter of the cutting insert d | 12.7 mm | |
| Corner radius R | 0 mm | |
| Corner chamfer length C | 0 mm | |
| Corner chamfer angle | 0 degrees | |
| Corner angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 11 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 5 mm | |
| ISO-Code | SPKN 1203 EDSR | |
| Tool material | Carbide | |
| Machining group, manufacturer-specific | HOG | |
| Machining group | M (stainless steel) | |
| Tool application group | SP1203ED1R | |
| Cutting media, manufacturer’s designation | HB7535 | |
| Coating | TiN | |
| Grade | HB7535 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | SPKN 1203 EDSR | |
| Interface coding for insert according to ISO TS 13399-60 | SP1203ED1R | |
| Insert designation | SPKN 1203 EDSR | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | K | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | clamping | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 4 pcs. | |
| Weight | 7 g | |
| Content | 10 pcs. | |
| Correction factor fz | 2.5 |
Identificazione e classificazione
| Codice articolo | 249318 | |
| Numero del catalogo | 213540 | |
| EAN / GTIN | 4045197319333 | |
| Codice del produttore | 213540 INOX | |
| Produttore/persona responsabile | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Tabella dati
N
500
N
500
N
400
P
250
P
250
P
250
P
140
P
110
M
70
M
50
K
200
Descrizione
Uso:
Placchetta di fresatura per testina portacoltelli n. art. 213100.