{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
TermoZ CS II 8/455 fissaggio per pannelli isolanti
Codice art.: 379565
N. del catalogo: 1933
Codice materiale:
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Dettagli prodotto
Dati tecnici
| Professionale / Fai da te | Profi | |
| d0 | 8 mm | |
| Profondità di ancoraggio | 25 mm | |
| Azionamento | TX30 |
Packaging units
| 1 Pacco | 100 pezzi | |
| 1 Pallet | 2400 pezzi |
Identificazione e classificazione
| Codice articolo | 379565 | |
| Numero del catalogo | 1933 | |
| EAN / GTIN | 4048962466225 | |
| Codice del produttore | 566428 | |
| Classe dell`articolo | RMH |
Descrizione
Vantaggi:
- Due to the steel compound screw of the TermoZ CS II, all facade insulations including the fire bar can be fastened securely.
- The screw fixing is also approved for fixing ETICS to ceiling undersides.
- The setting tool is used to countersink the anchor optimally, resulting in an even plaster layer without anchor marks.
- Due to the special expansion zone of the anchor sleeve, the TermoZ CS II, is the first insulation anchor with an approval for hammer-drilled holes in vertically perforated bricks.
- The plate design and sleeve labeling allow correct and intuitive application.
- The closed plate does not allow dirt to be ejected and thus ensures a clean setting result.
- The special geometry of the underhead plate reduces the necessary insertion torque for convenient and fast installation.
Area di applicazione:
- Attachment of ETICS insulating boards on concrete and masonry
- Flush installation in all conventional insulation materials
- Flush installation of insulation materials such as polystyrene rigid foam panels and dense mineral wool panels
- Fixing of ETICS insulating boards for new buildings and energetic building renovations
- The screw fixing is approved for both fixing ETICS to ceiling soffits and for ETICS with solid coverings.
- Building material classes A, B, C, D, E
- Concrete
- Concrete (weather shell)
- Building brick
- Solid sand-lime brick
- Hollow blocks made from lightweight concrete
- Vertically perforated brick
- Perforated sand-lime brick
- Lightweight aggregate concrete
- Aerated concrete
Note applicative:
- The fixing is pushed through the insulation into the drill hole and is screwed in. For ceiling soffits, the installation is carried out through the base plaster including fabric and insulation.
- For countersunk mounting, the setting tool TermoZ CS is required.
- Optionally, the setting tool TermoZ CS can also be used for flush installation by turning the stopping disc.
- When using the setting tool, the installation is completed when the stopping disc is flush with the insulation panel.
- For countersunk mounting the anchor plate needs to be covered with a closing cap.
- For a surface-flush setting, a closing plug is not necessary.