{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Fissaggio distanziato Thermax 8/80 M6
Codice art.: 402103
N. del catalogo: 4923
Codice materiale:
Dettagli prodotto
Dati tecnici
| Professionale / Fai da te | Profi | |
| Ambiente | Zona umida / Esterno | |
| materiale | zincato a freddo | |
| Protezione superficiale | zincato | |
| Materiale da costruzione | Calcestruzzo | |
| Profondità di ancoraggio | 60 mm | |
| Azionamento | Esagonale | |
| Imballaggio | scatola | |
| Tipo | 8/80 M6 | |
| Applicazione | Rilevatori di movimento | |
| Profondità del foro h1 | 140 mm |
Identificazione e classificazione
| Codice articolo | 402103 | |
| Numero del catalogo | 4923 | |
| EAN / GTIN | 4006209456866 | |
| Codice del produttore | 45686 | |
| Classe dell`articolo | RMH |
Descrizione
Vantaggi:
- The stand-off installation allows for the fixture to be adjusted to the exact position required, which avoids pressure marks and damage to the ETICS.
- The plastic cone creates a thermal barrier between the fixture and the inner fixture, and offers an energy-optimised fixing.
- The glass fibre reinforced plastic cone cuts its own way through the ETICS with a positive fit, and allows for a simple and fast installation without the need for any special tools.
- Combining with the universal plug UX provides secure anchoring in the substrate.
- Without the UX plug, direct installation in a wooden substrate is possible after pre-drilling, too.
Fornitura:
UX 10 / TherMax / SX 5
Area di applicazione:
- Concrete
- Vertically perforated brick
- Hollow blocks made from lightweight concrete
- Perforated sand-lime brick
- Solid sand-lime brick
- Building brick
- Aerated concrete
- Wood
For the thermally separated fixing of:
- Signs
- Lighting
- Letter boxes
- Motion detectors
- Downpipes
- Lightning rods
- Blind guide rails
Note applicative:
- The TherMax 8 is suitable for pre-positioned installation.
- The self-tapping, glass fibre reinforced cone cuts its own way through the plaster into the insulation during installation.
- The anti-cold cone uses a thermal barrier to minimise heat losses.
- Installation does not require any special tools.
- For use in wood without a plug, the wood (see the footnote beneath the load table) and plaster must be pre-drilled: TherMax 8: d02 = 14 mm, h02 = 50 mm.
- The assortment offers connection possibilities using metric screws M6, self-tapping screws 6.3 mm, chipboard screws 6.0 mm, and 4.5-5.5 mm chipboard screws when using a SX Plus 5 plug.