{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
Tassello prolungato Fischer, inox SXRL 10x260 FUS A4
Codice art.: 552248
N. del catalogo: 5155
Codice materiale:
Dettagli prodotto
Dati tecnici
| Con vite | Sì | |
| Idoneo per silicato di calcio | Sì | |
| Idoneo per laterizio forato | Sì | |
| Idoneo per legno | No | |
| Idoneo per laterizio pieno | Sì | |
| Azionamento | TX40 / SW 13 | |
| Idoneo per calcestruzzo cellulare | Sì | |
| Idoneo per pietra naturale | Sì | |
| Idoneo per vite per legno esagonale | Sì | |
| Idoneo per cartongesso | Nein | |
| Idoneo per fissaggio con fascette | No | |
| Colore | grigio | |
| Idoneo per calcestruzzo cellulare | Sì | |
| Idoneo per calcestruzzo | Sì | |
| Imballaggio | scatola | |
| Tipo | SXRL 10x260 FUS A4 | |
| versione | con vite | |
| d0 | 10 mm | |
| Omologazione / valutazione | Calcestruzzo | |
| h2 | 270 mm | |
| Lunghezza utilizzabile | 210 mm | |
| Con bordo | Sì | |
| Professionale / Fai da te | Profi | |
| Lunghezza del tassello | 260 mm | |
| Idoneo per pannelli truciolari | No | |
| Protezione superficiale | altri | |
| Superficie (vite) | Acciaio inossidabile A4 |
Identificazione e classificazione
| Codice articolo | 552248 | |
| Numero del catalogo | 5155 | |
| EAN / GTIN | 4048962181135 | |
| Codice del produttore | 522738 | |
| Classe dell`articolo | RMD |
Descrizione
Vantaggi:
- The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product.
- Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole.
- The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors.
- When it is to be set deep, the longer ribs prevent the plug from turning during installation.
- SXRL 10 and 14 are additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing.
- The SXRL with effective lengths up to 240 mm provides the right plug for every application.
Area di applicazione:
- Façade, ceiling and roof substructures made of wood and metal
- Facade substructures under compression load (e.g. distance installation without a wall bracket)
- Windows
- Gates and doors
- Wardrobes
- Kitchen hanging cabinets
- Squared timbers
- Beams
- TV consoles
- Wall covering
- Metal brackets
- Metal supports
- Cable ducts
- Cable trays
Approved for:
- Vertically perforated brick
- Aerated concrete
- Hollow blocks made from lightweight concrete
- Perforated sand-lime brick
- Thermal insulation blocks
- Solid block made from lightweight and normal weight concrete
- Solid brick
- Solid sand-lime brick
- Concrete ≥ C12/15
- Natural stone with dense structure
- Solid panel made from gypsum
Note applicative:
- The SXRL is suitable for push-through installation.
- In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force.
- In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate.
- Recommended for the fixing of metal constructions
- Countersunk head screws are recommended for wood constructions.